Skip to content
FREE SHIPPING on non-Industrial Storage orders $50+
FREE SHIPPING on non-Industrial Storage orders $50+
5/8-11 X 1-1/2in UNC Grade 8 Flange Bolt Phosphorus Oil

5/8-11 X 1-1/2in UNC Grade 8 Flange Bolt Phosphorus Oil

SKU FB58112C8
This 5/8-11 x 1 1/2 hex washer head bolt with a flat bearing surface is made of high-alloy steel. Primarily used on truck frames, this bolt's flange eliminates the need of washers and helps compensate for a misaligned hole. Typically used with a Grade G locking flange nut, the bolt system resists bolt slippage by distributing the clamp load over a wide area. The bolts shall be heat-treated, oil-quenched and tempered at a minimum temperature of 800 degrees (F). Being Grade 8 strength, the Proof Load is 120,000 PSI with a minimum Yield Strength of 130,000 PSI and Tensile Strength of 150,000 PSI.
Buy More, Save More
$3.19 / piece
25 - 99
0% off
$3.0305 / piece
100 - 324
5% off
$2.871 / piece
325 - 674
10% off
$2.7115 / piece
675 - 849
15% off
$2.552 / piece
850+
20% off
Description
This 5/8-11 x 1 1/2 hex washer head bolt with a flat bearing surface is made of high-alloy steel. Primarily used on truck frames, this bolt's flange eliminates the need of washers and helps compensate for a misaligned hole. Typically used with a Grade G locking flange nut, the bolt system resists bolt slippage by distributing the clamp load over a wide area. The bolts shall be heat-treated, oil-quenched and tempered at a minimum temperature of 800 degrees (F). Being Grade 8 strength, the Proof Load is 120,000 PSI with a minimum Yield Strength of 130,000 PSI and Tensile Strength of 150,000 PSI.