Skip to content
FREE SHIPPING on non-Industrial Storage orders $50+
FREE SHIPPING on non-Industrial Storage orders $50+
3/4-10 X 2-1/2in UNC Grade 8 Flange Bolt Phosphorus Oil

3/4-10 X 2-1/2in UNC Grade 8 Flange Bolt Phosphorus Oil

SKU FB34212C8
This 3/4-10 x 2 1/2 hex washer head bolt with a flat bearing surface is made of high-alloy steel. Primarily used on truck frames, this bolt's flange eliminates the need of washers and helps compensate for a misaligned hole. Typically used with a Grade G locking flange nut, the bolt system resists bolt slippage by distributing the clamp load over a wide area. The bolts shall be heat-treated, oil-quenched and tempered at a minimum temperature of 800 degrees (F). Being Grade 8 strength, the Proof Load is 120,000 PSI with a minimum Yield Strength of 130,000 PSI and Tensile Strength of 150,000 PSI.
Buy More, Save More
$5.41 / piece
20 - 39
0% off
$5.1395 / piece
40 - 79
5% off
$4.869 / piece
80 - 159
10% off
$4.5985 / piece
160 - 239
15% off
$4.328 / piece
240+
20% off
Description
This 3/4-10 x 2 1/2 hex washer head bolt with a flat bearing surface is made of high-alloy steel. Primarily used on truck frames, this bolt's flange eliminates the need of washers and helps compensate for a misaligned hole. Typically used with a Grade G locking flange nut, the bolt system resists bolt slippage by distributing the clamp load over a wide area. The bolts shall be heat-treated, oil-quenched and tempered at a minimum temperature of 800 degrees (F). Being Grade 8 strength, the Proof Load is 120,000 PSI with a minimum Yield Strength of 130,000 PSI and Tensile Strength of 150,000 PSI.