HTML sitemap for products

Products

• 5/8-18 X 5 Flange Bolt / Grade 8 / Fine (UNF) / Phosphorus/Oil
• 1/4-20 X 3/4 Stainless Steel Hex Cap Screw / Grade 18.8 / Coarse Thread (UNC)
• 1/4-20 X 3 1/2 Stainless Steel Hex Cap Screw / Grade 18.8 / Coarse Thread (UNC)
• 1/4-20 X 2 Stainless Steel Hex Cap Screw / Grade 18.8 / Coarse Thread (UNC)
• 1/4-20 X 1 Stainless Steel Hex Cap Screw / Grade 18.8 / Coarse Thread (UNC)
• M8 X 1.25 Metric Prevailing Torque (All Steel) Lock Nut / Class 10.9 / Zinc Plated / DIN #980/V-10
• M8 X 1.25 Metric Prevailing Torque (All Steel) Lock Nut / Class 8.8 / Zinc Plated / DIN #980
• M6 X 1.0 Metric Prevailing Torque (All Steel) Lock Nut / Class 10.9 / Zinc Plated / DIN #980/V-10
• 1/4-20 X 1/2 Stainless Steel Hex Cap Screw / Grade 18.8 / Coarse Thread (UNC)
• M6 X 1.0 Metric Prevailing Torque (All Steel) Lock Nut / Class 8.8 / Zinc Plated / DIN #980
• 1/4-20 X 1 1/2 Stainless Steel Hex Cap Screw / Grade 18.8 / Coarse Thread (UNC)
• M16 X 2.0 Metric Prevailing Torque (All Steel) Lock Nut / Class 10.9 / Zinc Plated / DIN #980/V-10
• M16 X 2.0 Metric Prevailing Torque (All Steel) Lock Nut / Class 8.8 / Zinc Plated / DIN #980
• M14 X 2.0 Metric Prevailing Torque (All Steel) Lock Nut / Class 8.8 / Zinc Plated / DIN #980
• M12 X 1.75 Metric Prevailing Torque (All Steel) Lock Nut / Class 10.9 / Zinc Plated / DIN #980/V-10
• M12 X 1.75 Metric Prevailing Torque (All Steel) Lock Nut / Class 8.8 / Zinc Plated / DIN #980
• M10 X 1.5 Metric Prevailing Torque (All Steel) Lock Nut / Class 10.9 / Zinc Plated / DIN #980/V-10
• M10 X 1.50 Metric Prevailing Torque (All Steel) Lock Nut / Class 8.8 / Zinc Plated / DIN #980
• 1/2-13 X 3 Stainless Steel Hex Cap Screw / Grade 18.8 / Coarse Thread (UNC)
• 1/2-13 X 2 Stainless Steel Hex Cap Screw / Grade 18.8 / Coarse Thread (UNC)
• 1/2-13 X 2 1/2 Stainless Steel Hex Cap Screw / Grade 18.8 / Coarse Thread (UNC)
• 1/2-13 X 1 3/4 Stainless Steel Hex Cap Screw / Grade 18.8 / Coarse Thread (UNC)
• 1/2-13 X 1 1/2 Stainless Steel Hex Cap Screw / Grade 18.8 / Coarse Thread (UNC)
• 9/16-18 Hex Nut / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 9/16-12 Hex Nut / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 9/16-12 Hex Nut / Grade 5 / Coarse (UNC) / Zinc Plated
• 7/8-14 Hex Nut / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 7/8-9 Hex Nut / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 7/8-9 Hex Nut / Grade 5 / Coarse (UNC) / Zinc Plated
• 7/16-20 Hex Nut / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 7/16-14 Hex Nut / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 7/16-14 Hex Nut / Grade 5 / Coarse (UNC) / Zinc Plated
• 5/8-18 Hex Nut / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 5/8-11 Hex Nut / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 5/8-11 Hex Nut / Grade 5 / Coarse (UNC) / Zinc Plated
• M8 X 1.25 Metric Nylon Lock Nut / Class 10.9 / Zinc Plated / DIN #985/V-10
• M8 X 1.25 Metric Nylon Lock Nut / Class 8.8 / Zinc Plated / DIN #985-8
• 5/16-24 Hex Nut / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• M6 X 1.0 Metric Nylon Lock Nut / Class 10.9 / Zinc Plated / DIN #985/V-10
• M6 X 1.0 Metric Nylon Lock Nut / Class 8.8 / Zinc Plated / DIN #985-8
• 5/16-18 Hex Nut / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 5/16-18 Hex Nut / Grade 5 / Coarse (UNC) / Zinc Plated
• 3/8-24 Hex Nut / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• M16 X 2.0 Metric Nylon Lock Nut / Class 8.8 / Zinc Plated / DIN #985-8
• 3/8-16 Hex Nut / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• M14 X 2.0 Metric Nylon Lock Nut / Class 10.9 / Zinc Plated / DIN #985/V-10
• M14 X 2.0 Metric Nylon Lock Nut / Class 8.8 / Zinc Plated / DIN #985-8
• 3/8-16 Hex Nut / Grade 5 / Coarse (UNC) / Zinc Plated
• M12 X 1.75 Metric Nylon Lock Nut / Class 10.9 / Zinc Plated / DIN #985/V-10
• M12 X 1.75 Metric Nylon Lock Nut / Class 8.8 / Zinc Plated / DIN #985-8
• 3/4-16 Hex Nut / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• M10 X 1.5 Metric Nylon Lock Nut / Class 10.9 / Zinc Plated / DIN #985/V-10
• M10 X 1.5 Metric Nylon Lock Nut / Class 8.8 / Zinc Plated / DIN #985-8
• 3/4-10 Hex Nut / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 3/4-10 Hex Nut / Grade 5 / Coarse (UNC) / Zinc Plated
• 9/16 SAE Extra Thick Flat Washer / Thru-Hardened / Yellow Zinc Plated
• 9/16 SAE Flat Washer / Thru-Hardened / Yellow Zinc Plated
• 9/16 SAE Flat Washer / Low Carbon / Zinc Plated
• 1-14 Hex Nut / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 9/16 USS Extra Thick Flat Washers / Thru-Hardened / Yellow Zinc Plated
• 9/16 USS Flat Washer / Thru-Hardened / Yellow Zinc Plated
• 9/16 USS Flat Washer / Zinc Plated
• 1-8 Hex Nut / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• M8 Metric Split Lock Washer / Thru-Hardened / Zinc Plated / Blu / CR3
• 1-8 Hex Nut / Grade 5 / Coarse (UNC) / Zinc Plated
• M8 Metric Split Lock Washer / Low Carbon / Zinc Plated / Din #127B
• 7/8 SAE Flat Washer / Thru-Hardened / Yellow Zinc Plated
• M6 Metric Split Lock Washer / Thru-Hardened / Zinc Plated / Blu / CR3
• 7/8 SAE Flat Washer / Low Carbon / Zinc Plated
• M6 Metric Split Lock Washer / Low Carbon / Zinc Plated / Din #127B
• 7/8 USS Extra Thick Flat Washers / Thru-Hardened / Yellow Zinc Plated
• 7/8 USS Flat Washer / Thru-Hardened / Yellow Zinc Plated
• M5 Metric Split Lock Washer / Low Carbon / Zinc Plated / Din #127B
• 7/8 USS Flat Washer / Zinc Plated
• 1/4-28 Hex Nut / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• M4 Metric Split Lock Washer / Low Carbon / Zinc Plated / Din #127B
• 7/16 SAE Extra Thick Flat Washer / Thru-Hardened / Yellow Zinc Plated
• 7/16 SAE Flat Washer / Thru-Hardened / Yellow Zinc Plated
• 1/4-20 Hex Nut / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 7/16 SAE Flat Washer / Low Carbon / Zinc Plated
• M20 Metric Split Lock Washer / Thru-Hardened / Zinc Plated / Blu / CR3
• 1/4-20 Hex Nut / Grade 5 / Coarse (UNC) / Zinc Plated
• M20 Metric Split Lock Washer / Low Carbon / Zinc Plated / Din #127B
• 7/16 USS Extra Thick Flat Washers / Thru-Hardened / Yellow Zinc Plated
• 7/16 USS Flat Washer / Thru-Hardened / Yellow Zinc Plated
• M16 Metric Split Lock Washer / Thru-Hardened / Zinc Plated / Blu / CR3
• 7/16 USS Flat Washer / Zinc Plated
• M16 Metric Split Lock Washer / Low Carbon / Zinc Plated / Din #127B
• M14 Metric Split Lock Washer / Thru-Hardened / Zinc Plated / Blu / CR3
• M14 Metric Split Lock Washer / Low Carbon / Zinc Plated / Din #127B
• M12 Metric Split Lock Washer / Thru-Hardened / Zinc Plated / Blu / CR3
• M12 Metric Split Lock Washer / Low Carbon / Zinc Plated / Din #127B
• M10 Metric Split Lock Washer / Thru-Hardened / Zinc Plated / Blu / CR3
• 5/8 SAE Extra Thick Flat Washer / Thru-Hardened / Yellow Zinc Plated
• M10 Metric Split Lock Washer / Low Carbon / Zinc Plated / Din #127B
• 5/8 SAE Flat Washer / Thru-Hardened / Yellow Zinc Plated
• 5/8 SAE Flat Washer / Low Carbon / Zinc Plated
• 5/8 USS Extra Thick Flat Washers / Thru-Hardened / Yellow Zinc Plated
• 5/8 USS Flat Washer / Thru-Hardened / Yellow Zinc Plated
• 1/2-20 Hex Nut / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 5/8 USS Flat Washer / Zinc Plated
• 5/16 SAE Extra Thick Flat Washer / Thru-Hardened / Yellow Zinc Plated
• 5/16 SAE Flat Washer / Thru-Hardened / Yellow Zinc Plated
• 1/2-13 Hex Nut / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 5/16 SAE Flat Washer / Low Carbon / Zinc Plated
• 1/2-13 Hex Nut / Grade 5 / Coarse (UNC) / Zinc Plated
• 5/16 USS Extra Thick Flat Washers / Thru-Hardened / Yellow Zinc Plated
• 5/16 USS Flat Washer / Thru-Hardened / Yellow Zinc Plated
• 5/16 USS Flat Washer / Zinc Plated
• 3/8 SAE Extra Thick Flat Washer / Thru-Hardened / Yellow Zinc Plated
• 3/8 SAE Flat Washer / Thru-Hardened / Yellow Zinc Plated
• 3/8 SAE Flat Washer / Low Carbon / Zinc Plated
• 3/8 USS Extra Thick Flat Washers / Thru-Hardened / Yellow Zinc Plated
• 3/8 USS Flat Washer / Thru-Hardened / Yellow Zinc Plated
• 3/8 USS Flat Washer / Zinc Plated
• 3/4 SAE Extra Thick Flat Washer / Thru-Hardened / Yellow Zinc Plated
• 3/4 SAE Flat Washer / Thru-Hardened / Yellow Zinc Plated
• 3/4 SAE Flat Washer / Low Carbon / Zinc Plated
• 3/4 USS Extra Thick Flat Washers / Thru-Hardened / Yellow Zinc Plated
• 3/4 USS Flat Washer / Thru-Hardened / Yellow Zinc Plated
• 3/4 USS Flat Washer / Zinc Plated
• 1 SAE Extra Thick Flat Washer / Thru-Hardened / Yellow Zinc Plated
• 1 SAE Flat Washer / Thru-Hardened / Yellow Zinc Plated
• 1 SAE Flat Washer / Low Carbon / Zinc Plated
• 1" USS Extra Thick Flat Washers / Thru-Hardened / Yellow Zinc Plated
• 1 USS Flat Washer / Thru-Hardened / Yellow Zinc Plated
• 1 USS Flat Washer / Zinc Plated
• 1/4 SAE Extra Thick Flat Washer / Thru-Hardened / Yellow Zinc Plated
• 1/4 SAE Flat Washer / Thru-Hardened / Yellow Zinc Plated
• 1/4 SAE Flat Washer / Low Carbon / Zinc Plated
• 1/4 USS Extra Thick Flat Washers / Thru-Hardened / Yellow Zinc Plated
• 1/4 USS Flat Washer / Thru-Hardened / Yellow Zinc Plated
• 1/4 USS Flat Washer / Zinc Plated
• 1/2 SAE Extra Thick Flat Washer / Thru-Hardened / Yellow Zinc Plated
• 1/2 SAE Flat Washer / Thru-Hardened / Yellow Zinc Plated
• 1/2 SAE Flat Washer / Low Carbon / Zinc Plated
• 1/2 USS Extra Thick Flat Washers / Thru-Hardened / Yellow Zinc Plated
• 1/2 USS Flat Washer / Thru-Hardened / Yellow Zinc Plated
• 1/2 USS Flat Washer / Zinc Plated
• M8 X 1.0 Metric Hex Nut / Plain Finish / Class 10.9 / Medium / DIN #934
• M8 X 1.0 Metric Hex Nut / Class 8.8 / Zinc Plated / Medium / DIN #934
• M8 X .75 Metric Hex Nut / Class 8.8 / Plain Finish / Fine / DIN #934
• M8 X 1.25 Metric Hex Nut / Zinc Plated / Class 10.9 / DIN #934
• M8 X 1.25 Metric Hex Nut / Class 8.8 / Zinc Plated / DIN #934
• M6 X .75 Metric Hex Nut / Class 8.8 / Zinc Plated / Fine / DIN #934
• M6 X 1.0 Metric Hex Nut / Zinc Plated / Class 10.9 / DIN #934
• M6 X 1.0 Metric Hex Nut / Class 8.8 / Zinc Plated / DIN #934
• M5 X .8 Metric Hex Nut / Class 8.8 / Zinc Plated / DIN #934
• M4 X .7 Metric Hex Nut / Class 8.8 / Zinc Plated / DIN #934
• M20 X 2.5 Metric Hex Nut / Zinc Plated / Class 10.9 / DIN #934
• M18 X 2.5 Metric Hex Nut / Zinc Plated / Class 10.9 / DIN #934
• M16 X 1.5 Metric Hex Nut / Zinc Plated / Class 10.9 / Fine / DIN #934
• M16 X 2.0 Metric Hex Nut / Zinc Plated / Class 10.9 / DIN #934
• M16 X 2.0 Metric Hex Nut / Class 8.8 / Zinc Plated / DIN #934
• M14 X 1.5 Metric Hex Nut / Zinc Plated / Class 10.9 / DIN #934
• M14 X 1.5 Metric Hex Nut / Class 8.8 / Zinc Plated / Medium / DIN #934
• M14 X 2.0 Metric Hex Nut / Zinc Plated / Class 10.9 / DIN #934
• M14 X 2.0 Metric Hex Nut / Class 8.8 / Zinc Plated / DIN #934
• M12 X 1.5 Metric Hex Nut / Plain Finish / Class 10.9 / Medium / DIN #934
• M12 X 1.5 Metric Hex Nut / Class 8.8 / Zinc Plated / Medium / DIN #934
• M12 X 1.25 Metric Hex Nut / Zinc Plated / Class 10.9 / Fine / DIN #934
• M12 X 1.25 Metric Hex Nut / Class 8.8 / Zinc Plated / Fine / DIN #934
• M12 X 1.75 Metric Hex Nut / Zinc Plated / Class 10.9 / DIN #934
• M12 X 1.75 Metric Hex Nut / Class 8.8 / Zinc Plated / DIN #934
• M10 X 1.25 Metric Hex Nut / Zinc Plated / Class 10.9 / DIN #934
• M10 X 1.25 Metric Hex Nut / Class 8.8 / Zinc Plated / Medium / DIN #934
• M10 X 1.0 Metric Hex Nut / Class 8.8 / Zinc Plated / Fine / DIN #934
• M10 X 1.5 Metric Hex Nut / Zinc Plated / Class 10.9 / DIN #934
• M10 X 1.5 Metric Hex Nut / Class 8.8 / Zinc Plated / DIN #934
• 9/16-12 X 4 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 9/16-12 X 3 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• M8 Metric Flat Washer / Class 10.9 / Zinc Plated / DIN #125/H-V
• M8 Metric Flat Washer / Class 8.8 / Zinc Plated / DIN #125A
• M6 Metric Flat Washer / Class 10.9 / Zinc Plated / DIN #125/H-V
• M6 Metric Flat Washer / Class 8.8 / Zinc Plated / DIN #125A
• M5 Metric Flat Washer / Class 8.8 / Zinc Plated / DIN #125A
• M4 Metric Flat Washer / Class 8.8 / Zinc Plated / DIN #125A
• 9/16-12 X 2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• M20 Metric Flat Washer / Class 10.9 / Zinc Plated / DIN #125/H-V
• M20 Metric Flat Washer / Class 8.8 / Zinc Plated / DIN #125A
• M18 Metric Flat Washer / Class 10.9 / Zinc Plated / DIN #125/H-V
• 9/16-12 X 2 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• M16 Metric Flat Washer / Class 10.9 / Zinc Plated / DIN #125/H-V
• M16 Metric Flat Washer / Class 8.8 / Zinc Plated / DIN #125A
• M14 Metric Flat Washer / Class 10.9 / Zinc Plated / DIN #125/H-V
• M14 Metric Flat Washer / Class 8.8 / Zinc Plated / DIN #125A
• M12 Metric Flat Washer / Class 10.9 / Zinc Plated / DIN #125/H-V
• M12 Metric Flat Washer / Class 8.8 / Zinc Plated / DIN #125A
• 9/16-12 X 1 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• M10 Metric Flat Washer / Class 10.9 / Zinc Plated / DIN #125/H-V
• M10 Metric Flat Washer / Class 8.8 / Zinc Plated / DIN #125A
• 7/8-9 X 5 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 7/8-9 X 4 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 7/8-9 X 3 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 7/8-9 X 3 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 7/8-9 X 2 1/4 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 3/8-16 X 3 Carriage Bolt / Grade 5 / Coarse (UNC) / Full Thread / Zinc Plated
• 3/8-16 X 3 Carriage Bolt / Grade 2 / Coarse (UNC) / Full Thread / Zinc Plated
• 7/8-9 X 10 Hex Cap Screw / Grade 8 / Coarse (UNC) / Plain Finish
• 3/8-16 X 3 1/2 Carriage Bolt / Grade 5 / Coarse (UNC) / Full Thread / Plain Finish
• 7/16-14 X 4 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 7/16-14 X 3 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 7/16-14 X 3 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 7/16-14 X 2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 7/16-14 X 2 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 7/16-14 X 2 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 7/16-14 X 2 1/2 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 7/16-14 X 1 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 7/16-14 Serrated Flange Nut / Grade 2 / Coarse (UNC) / Zinc Plated
• 7/16-14 X 1 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 5/8-11 Serrated Flange Nut / Grade 2 / Coarse (UNC) / Zinc Plated
• 5/16-18 Serrated Flange Nut / Grade 2 / Coarse (UNC) / Zinc Plated
• 3/8-16 Serrated Flange Nut / Case Hardened / Coarse (UNC) / Zinc Plated
• 3/4-10 Serrated Flange Nut / Grade 2 / Coarse (UNC) / Zinc Plated
• 7/16-14 X 1 1/4 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 1/4-20 Serrated Flange Nut / Grade 2 / Coarse (UNC) / Zinc Plated
• 1/2-13 Serrated Flange Nut / Grade 2 / Coarse (UNC) / Zinc Plated
• 7/16-14 X 1 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 7/16-14 X 1 1/2 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• M8 X 1.25 X 50 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• #8-32 Stainless Steel Nylon Lock Nut / Grade 18.8 / Coarse (UNC)
• 5/8-18 Flange Nut Locking / Grade G / Fine (UNF) / Phosphorus/Oil
• 5/8-11 Flange Nut Locking / Grade G / Coarse (UNC) / Yellow Zinc Plated
• 5/8-11 x 5 Hex Tap Bolt Fully Threaded Grade 8 Plain Finish UNC
• 5/8-11 Flange Nut Locking / Grade G / Coarse (UNC) / Phosphorus/Oil
• 5/16-18 Flange Nut Locking / Grade G / Coarse (UNC) / Zinc Yellow Plated
• #6-32 Stainless Steel Nylon Lock Nut / Grade 18.8 / Coarse (UNC)
• 3/8-16 Flange Nut Locking / Grade G / Coarse (UNC) / Phosphorus/Oil
• 3/4-16 Flange Nut Locking / Grade G / Fine (UNF) / Phosphorus/Oil
• 5/8-11 Stainless Steel Nylon Lock Nut / Grade 18.8 / Coarse (UNC)
• 3/4-10 Flange Nut Locking / Grade G / Coarse (UNC) / Yellow Zinc Plated
• 3/4-10 Flange Nut Locking / Grade G / Coarse (UNC) / Phosphorus/Oil
• M8 X 1.25 X 40 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• 5/16-18 Stainless Steel Nylon Lock Nut / Grade 18.8 / Coarse (UNC)
• 1/2-13 Flange Nut Locking / Grade G / Coarse (UNC) / Zinc Plated
• 3/8-16 Stainless Steel Nylon Lock Nut / Grade 18.8 / Coarse (UNC)
• 1/2-13 Flange Nut Locking / Grade G / Coarse (UNC) / Phosphorus/Oil
• M8 X 1.25 X 35 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• 1/4-20 Stainless Steel Nylon Lock Nut / Grade 18.8 / Coarse (UNC)
• 5/16-18 x 3 Hex Tap Bolt Fully Threaded Grade 5 Zinc Plated UNC
• M8 X 1.25 X 30 Metric Cap Screw / Class 10.9 / Zinc Plated / Full Thread / DIN #933
• M8 X 1.25 X 30 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• 1/2-13 Stainless Steel Nylon Lock Nut / Grade 18.8 / Coarse (UNC)
• M8 X 1.25 X 25 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• 5/16-18 X 2 1/2 Hex Tap Bolt Fully Threaded Grade 5 Zinc Plated UNC
• 5/8-11 X 6 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• #10-24 Stainless Steel Nylon Lock Nut / Grade 18.8 / Coarse (UNC)
• M8 X 1.25 X 20 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• M8 X 1.25 X 20 Metric Cap Screw / Class 10.9 / Zinc Plated / Full Thread / DIN #933
• 5/8-18 X 5 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 5/8-11 X 5 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 5/8-11 X 5 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• M8 X 1.25 X 16 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• 5/8-11 X 5 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 5/8-18 X 4 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 5/8-11 X 4 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 5/8-11 X 4 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 5/8-18 X 4 1/2 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 5/8-11 X 4 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 3/4-10 x 6 Hex Tap Bolt Fully Threaded Grade 8 Plain Finish Coarse
• 5/8-18 X 3 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 5/8-11 X 3 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 5/8-11 X 3 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 5/8-18 X 3 1/2 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 5/8-11 X 3 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 5/8-18 X 2 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 5/8-11 X 2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 5/8-11 X 2 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 5/8-11 X 2 1/4 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 5/8-18 X 2 1/2 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• M6 X 1.0 X 30 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• M6 X 1.0 X 25 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• 5/8-11 X 2 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 5/8-11 X 2 1/2 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• M6 X 1.0 X 20 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• M6 X 1.0 X 20 Metric Cap Screw / Class 10.9 / Zinc Plated / Full Thread / DIN #933
• M6 X 1.0 X 16 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• M6 X 1.0 X 16 Metric Cap Screw / Class 10.9 / Zinc Plated / Full Thread / DIN #933
• M6 X 1.0 X 12 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• M6 X 1.0 X 10 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• 5/8-11 X 12 Hex Cap Screw / Grade 5 / Coarse (UNC) / Plain Finish
• 5/8-11 X 1 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 5/8-11 X 1 1/2 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 5/16-18 X 4 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 5/16-18 X 3 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 5/16-18 X 3 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 5/16-18 X 3/4 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 5/16-18 X 3/4 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 9/16-18 All Steel Lock Nut / Prevailing Torque / Grade C / Fine (UNF) / Zinc Plated
• 9/16-12 All Steel Lock Nut / Prevailing Torque / Grade C / Coarse (UNC) / Zinc Plated
• 7/8-14 All Steel Lock Nut / Prevailing Torque / Grade C / Fine (UNF) / Zinc Plated
• 7/8-9 All Steel Lock Nut / Prevailing Torque / Grade C / Coarse (UNC) / Zinc Plated
• 7/16-20 All Steel Lock Nut / Prevailing Torque / Grade C / Fine (UNF) / Zinc Plated
• 7/16-14 All Steel Lock Nut / Prevailing Torque / Grade C / Coarse (UNC) / Zinc Plated
• 5/8-18 All Steel Lock Nut / Prevailing Torque / Grade C / Fine (UNF) / Zinc Plated
• 5/8-11 All Steel Lock Nut / Prevailing Torque / Grade C / Coarse (UNC) / Zinc Plated
• 5/16-24 All Steel Lock Nut / Prevailing Torque / Grade C / Fine (UNF) / Zinc Plated
• 5/16-18 All Steel Lock Nut / Prevailing Torque / Grade C / Coarse (UNC) / Zinc Plated
• 3/8-24 All Steel Lock Nut / Prevailing Torque / Grade C / Fine (UNF) / Zinc Plated
• 3/8-16 All Steel Lock Nut / Prevailing Torque / Grade C / Coarse (UNC) / Zinc Plated
• 5/16-18 X 3 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 3/4-16 All Steel Lock Nut / Prevailing Torque / Grade C / Fine (UNF) / Zinc Plated
• 3/4-10 All Steel Lock Nut / Prevailing Torque / Grade C / Coarse (UNC) / Zinc Plated
• 5/16-18 X 2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 1-14 All Steel Lock Nut / Prevailing Torque / Grade C / Fine (UNF) / Zinc Plated
• 5/16-18 X 2 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 1-8 All Steel Lock Nut / Prevailing Torque / Grade C / Coarse (UNC) / Zinc Plated
• 1/4-28 All Steel Lock Nut / Prevailing Torque / Grade C / Fine (UNF) / Zinc Plated
• M20 X 2.5 X 90 Metric Cap Screw / Class 10.9 / Zinc Plated / Partial Thread / DIN #931
• 1/4-20 All Steel Lock Nut / Prevailing Torque / Grade C / Coarse (UNC) / Zinc Plated
• 1/2-20 All Steel Lock Nut / Prevailing Torque / Grade C / Fine (UNF) / Zinc Plated
• M20 X 2.5 X 70 Metric Cap Screw / Class 10.9 / Zinc Plated / Partial Thread / DIN #931
• 1/2-13 All Steel Lock Nut / Prevailing Torque / Grade C / Coarse (UNC) / Zinc Plated
• M20 X 2.5 X 60 Metric Cap Screw / Class 10.9 / Zinc Plated / Full Thread / DIN #933
• 5/16-18 X 2 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 5/16-18 X 2 1/2 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• M20 X 2.5 X 50 Metric Cap Screw / Class 10.9 / Zinc Plated / Full Thread / DIN #933
• 5/16-18 X 1 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 5/16-18 X 1 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 5/16-24 X 1 1/4 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 5/16-18 X 1 1/4 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 5/16-18 X 1 1/4 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 5/16-18 X 1 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 5/16-18 X 1 1/2 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 3/8-16 X 5 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 3/8-16 X 4 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 3/8-16 X 4 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 5/16 X 1 3/4 Extra Thick Fender Washer / Zinc Plated
• 5/16 X 1 1/4 Extra Thick Fender Washer / Zinc Plated
• 5/16 X 1 1/4 Fender Washer / Zinc Plated
• 3/8-16 X 3 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 3/8-16 X 3 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 5/16 X 1 1/2 Extra Thick Fender Washer / Zinc Plated
• 5/16 X 1 1/2 Fender Washer / Zinc Plated
• 3/8-16 X 3/4 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 3/8 X 2 Fender Washer / Zinc Plated
• 3/8-16 X 3/4 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 3/8 X 1 3/4 Extra Thick Fender Washer / Zinc Plated
• M16 X 2.0 X 60 Metric Cap Screw / Class 10.9 / Zinc Plated / Partial Thread / DIN #931
• 3/8 X 1 1/4 Extra Thick Fender Washer / Zinc Plated
• 3/8 X 1 1/4 Fender Washer / Zinc Plated
• 3/8 X 1 1/2 Extra Thick Fender Washer / Zinc Plated
• 3/8 X 1 1/2 Fender Washer / Zinc Plated
• 3/16 X 1 1/4 Fender Washer / Zinc Plated
• 3/8-16 X 3 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 3/8-16 X 3 1/2 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• M16 X 2.0 X 40 Metric Cap Screw / Class 10.9 / Zinc Plated / Full Thread / DIN #933
• 1/4 X 1 Extra Thick Fender Washer / Zinc Plated
• 1/4 X 1 1/4 Fender Washer / Zinc Plated
• 3/8-16 X 2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 3/8-16 X 2 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 1/4 X 1 1/2 Extra Thick Fender Washer / Zinc Plated
• 1/4 X 1 1/2 Fender Washer / Zinc Plated
• 1/4 X 1 Fender Washer / Zinc Plated
• 1/2 X 2 Extra Thick Fender Washer / Zinc Plated
• 1/2 X 2 Fender Washer / Zinc Plated
• 1/2 X 1 1/2 Fender Washer / Zinc Plated
• 3/8-16 X 2 1/4 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 3/8-16 X 2 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 3/8-16 X 2 1/2 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 3/8-16 X 1 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 3/8-16 X 1 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• M16 X 2.0 X 110 Metric Cap Screw / Class 10.9 / Zinc Plated / Partial Thread / DIN #931
• M16 X 2.0 X 100 Metric Cap Screw / Class 10.9 / Zinc Plated / Partial Thread / DIN #931
• 3/8-16 X 1 3/4 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 3/8-16 X 1 3/4 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 3/8-16 X 1 1/4 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 3/8-16 X 1 1/4 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 3/8-24 X 1 1/2 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 5/16-18 X 5/8 Serrated Flange Bolt / Grade 5 / Coarse (UNC) / Zinc Plated
• 3/8-16 X 1 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 5/16-18 X 3/4 Serrated Flange Bolt / Grade 5 / Coarse (UNC) / Zinc Plated
• 3/8-16 X 1 1/2 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 5/16-18 X 1 1/2 Serrated Flange Bolt / Grade 5 / Coarse (UNC) / Zinc Plated
• 3/4-10 X 9 Hex Cap Screw / Grade 8 / Coarse (UNC) / Plain Finish
• 3/8-16 X 1 1/4 Serrated Flange Bolt / Grade 5 / Coarse (UNC) / Zinc Plated
• 3/4-10 X 8 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 1/4-20 X 1/2 Serrated Flange Bolt / Grade 5 / Coarse (UNC) / Zinc Plated
• M14 X 2.0 X 40 Metric Cap Screw / Class 10.9 / Plain Finish / Full Thread / DIN #933
• 3/4-10 X 7 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 3/4-10 X 7-1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Plain Finish
• 3/4-10 X 6 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 3/4-10 X 6 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 5/8-18 X 3 Flange Bolt / Grade 8 / Fine (UNF) / Phosphorus/Oil
• 5/8-11 X 3 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• 3/4-10 X 5 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 5/8-11 X 3 1/2 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• 5/8-18 X 2 Flange Bolt / Grade 8 / Fine (UNF) / Phosphorus/Oil
• 5/8-11 X 2 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• 3/4-10 X 5 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 5/8-11 X 2 1/4 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• 5/8-18 X 2 1/2 Flange Bolt / Grade 8 / Fine (UNF) / Phosphorus/Oil
• 5/8-11 X 2 1/2 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• 3/4-10 X 4 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 3/4-10 X 4 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 5/8-11 X 1 1/2 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• 3/4-10 X 4 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 3/4-16 X 3 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 3/4-10 X 3 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 3/4-10 X 3 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• M12 X 1.75 X 70 Metric Cap Screw / Class 10.9 / Zinc Plated / Partial Thread / DIN #931
• 1/8D 3/8G Aluminum/Aluminum Large Flange Pop Rivet
• M12 X 1.5 X 65 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Partial Thread / DIN #960
• 1 1/8 Structural Flat Washer / Grade F436 / Fine (UNF) / Plain Finish
• 1/8 X 3/16 BLACK NYLON STRAIGHT CONNECTOR
• FORD WIRE HARNESS CONN COIL TO IGN. 18GA WIRE
• 1/8-27 Straight Grease Fitting (OVL= 1 1/4)
• 1/8D 3/8G Aluminum/Aluminum Dome Head Pop Rivet
• 3/4-10 X 3 3/4 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 3/8-16 X 2 1/4 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• 3/16 Hex Splicer Brass
• 24 HOLE TRAY INSERT FOR A DL (LARGE) DRAWER
• 1/4X3 SECURITY TORX/PIN TAMPERPROOF L KEY
• DOOR TRIM PANEL RETAINER
• 1/8 90-Degree Pipe Thread Grease Fitting
• M12 X 1.25 X 65 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Partial Thread / DIN #960
• 1/8D 5/16G Aluminum/Aluminum Dome Head Pop Rivet
• 1 1/4 Structural Flat Washer / Grade F436 / Fine (UNF) / Plain Finish
• 3/8-16 X 2 1/2 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• 1/8 X 1/8 WHITE NYLON STRAIGHT CONNECTOR CONNECTOR
• 1/4 SECURITY TORX PIN TAMPERPROOF INSERT BIT
• 1/8 65-Degree Pipe Thread Grease Fitting
• M12 X 1.75 X 65 Metric Cap Screw / Class 10.9 / Zinc Plated / Partial Thread / DIN #931
• 3/4-10 X 3 3/4 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 1 1/2 Structural Flat Washer / Grade F436 / Fine (UNF) / Plain Finish
• 1/8D 1/4G Aluminum/Aluminum Large Flange Pop Rivet
• 3/8-16 X 1 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• 3/16 X 3/16 X 3/16 WHITE NYLON Y CONNECTOR
• 1/8 45-Degree Pipe Thread Grease Fitting
• 1/8D 1/4G Aluminum/Aluminum Dome Head Pop Rivet
• 3/4-16 X 3 1/4 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 1 Structural Flat Washer / Grade F436 / Fine (UNF) / Plain Finish
• GM Push Type Retainer Apron 19mm Head 14mm Length 8.5mm Hole Black
• 3/8-16 X 1 3/4 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• M12 X 1.5 X 60 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Full Thread / DIN #961
• 1/8 Straight Pipe Thread Grease Fitting
• 1/8D 1/4G Closed End Aluminum/Aluminum Domed Head Pop Rivet
• #8 SECURITY TORX PIN TAMPERPROOF INSERT BIT
• M12 X 1.50 X 60 Metric Cap Screw / Class 10.9 / Plain Finish / Full Thread / DIN #961
• Dividers #120-95 for use with Adjustable Drawer #119
• 1/8D 3/16G Aluminum/Aluminum Large Flange Pop Rivet
• 3/8-16 X 1/2 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• 1/4-28 X .80 LONG 90 DEGREE GREASE FITTING"
• M12 X 1.25 X 60 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Partial Thread / DIN #960
• 1/8D 3/16G Aluminum/Aluminum Dome Head Pop Rivet
• 3/8-16 X 1 1/4 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• 1/4-28 90-Degree Grease Fitting 29/32 length plated
• 3/4-10 X 3 1/4 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 20-18 FEMALE FORD OEM TERMINAL
• 1/8D 1/8G Aluminum/Aluminum Large Flange Pop Rivet
• M12 X 1.25 X 60 Metric Cap Screw / Class 10.9 / Plain Finish / Full Thread / DIN #961
• 3/8-16 X 1 1/2 Flange Bolt / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 3/4-16 X 3 1/2 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 1/4-28 X.3 Long 45 Degree Grease Fitting
• FORD OEM TERMINAL BLADE 20-18 MALE
• 1/8 (FOR #6-#8) SECURITY SOCKET PIN HEAD BIT
• 3/8-16 X 1 1/2 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• 1/8D 1/8G Aluminum/Aluminum Dome Head Pop Rivet
• 1/4-28 45-Degree Grease Fitting
• 3/4-10 X 6 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• 1/4-28 Straight Grease Fitting (15/16 Long)
• 1/8D 1/16G Aluminum/Aluminum Dome Head Pop Rivet
• 1/4-28 Straight Grease Fitting (OVL= 11/16)
• 3/32D 1/4G Aluminum/Aluminum Dome Head Pop Rivet
• 3/4-10 X 5 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• M12 X 1.75 X 60 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• Dividers for Jumbo Drawers 3 1/2" high #036
• 1/4-28 Straight Grease Fitting (OVL= 9/16)
• 3/4-10 X 3 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• #8 X 5/8 Stainless Steel Slotted Hex Washer Tapping Screw / Grade 18.8
• 3/32D 1/8G Aluminum/Aluminum Dome Head Pop Rivet
• 3/4-10 X 4 Flange Bolt / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• M12 X 1.5 X 55 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Partial Thread / DIN #960
• 1 NYLON TUBE CLAMP 3/16 HOLE DIAMETER"
• 3/4-10 X 3 1/2 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 3/4-10 X 4 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• M12 X 1.25 X 55 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Partial Thread / DIN #960
• Dividers for Drawers use wtih 18D
• 3/4 NYL TUBE CLM
• #8 X 3/4 Stainless Steel Slotted Hex Washer Tapping Screw / Grade 18.8
• 3/4 Hex Hose Splicer Barb Brass
• 5/8 NYL TUBE CLMP
• M12 X 1.25 X 55 Metric Cap Screw / Class 10.9 / Zinc Plated / Partial Thread / DIN #960
• 3/4-16 X 2 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• #8 X 3/4 Stainless Steel Hex Washer Tek Screw / Grade 410
• 5/8 Hex Hose Splicer Barb Brass
• 1/8 ALUMINUM POP RIVET BACK UP WASHER
• 1/2 TUBING CLAMP
• M12 X 1.75 X 55 Metric Cap Screw / Class 10.9 / Zinc Plated / Full Thread / DIN #933
• #8 X 1 Stainless Steel Ind Hex Washer Tapping Screw / Grade 410
• Ford Trim Panel Retainer Black Nylon 9/32 stem, 1 1/6 length
• 3/4-16 X 3 Flange Bolt / Grade 8 / Fine (UNF) / Phosphorus/Oil
• POP RIVET TOOL KIT W/GUN & RIVETS & NOSE PCS
• 3/8 NYL TUBE CLMP
• M12 X 1.75 X 55 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Partial Thread / DIN #931
• 1/2 x 11/16 Black Rubber Vacuum Cap Fits 1/2" Tube OD
• #8 X 1 Stainless Steel Slotted Hex Washer Tapping Screw / Grade 18.8
• 3/4-10 X 3 Flange Bolt / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• POP RIVET GUN W/NOSE PIECES IN BOX
• 5/16 NYL TB CLAMP
• #8 X 1 Stainless Steel Hex Washer Tek Screw / Grade 410
• 5/16 X 1 1/4 BLACK RUBBER VACUUM CAP FITS 5/16" TUBE O.D.
• 3/4-10 X 3 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• 1/4 Nylon Tubing Clamp
• M12 X 1.50 X 50 Metric Cap Screw / Class 10.9 / Plain Finish / Partial Thread / DIN #960
• 3/4-10 X 2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 3/4-16 X 3 1/2 Flange Bolt / Grade 8 / Fine (UNF) / Phosphorus/Oil
• M12 X 1.5 X 50 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Partial Thread / DIN #960
• #8 X 1/2 Stainless Steel Slotted Hex Washer Tapping Screw / Grade 18.8
• 3/4-10 X 3 1/2 Flange Bolt / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 20mm HD Push Retainer Acrua (25/64 x 15mm)
• M12 X 1.50 X 50 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #961
• FORD WEATHER STRIP RETAINER
• 3/4-10 X 2 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• #8 X 1/2 Stainless Steel Hex Washer Tek Screw / Grade 410
• 3/4-10 X 3 1/2 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• M12 X 1.25 X 50 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Partial Thread / DIN #960
• 3/4-10X 2 HEX CAP SCREW GRADE 2 HOT DIP GALVANIZED
• #8 X 1 1/4 Stainless Steel Slotted Hex Washer Tapping Screw / Grade 18.8
• 3/4-16 X 2 Flange Bolt / Grade 8 / Fine (UNF) / Phosphorus/Oil
• 4 HARNESS STRAP"
• M12 X 1.25 X 50 Metric Cap Screw / Class 10.9 / Plain Finish / Full Thread / DIN #961
• #8 X 1 1/4 Stainless Steel Hex Washer Tek Screw / Grade 410
• 3/4-10 X 2 Flange Bolt / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 1/16X3/8 RTNR PIN
• 1/4 x 1/8 Black Pipe Reducing Coupling
• #8 X 1 1/2 Stainless Steel Slotted Hex Washer Tapping Screw / Grade 18.8
• 3/4-10 X 2 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• 1/8 x 1 1/2 Black Pipe Long Nipple
• M12 X 1.75 X 50 Metric Cap Screw / Class 10.9 / Zinc Plated / Full Thread / DIN #933
• #8 X 1 1/2 Stainless Steel Indented Hex Washer Tek Screw / Grade 410
• 5/32 RETAINER PIN
• Toyota / Lexus Pin Retainer Front Fender & Bumper 15mm head 25mm length
• ROCKER PANEL MOULDING CLIP YELLOW NYLON
• M12 X 1.75 X 50 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• #6 X 3/4 Stainless Steel Ind Hex Washer Tapping Screw / Grade 410
• 3/4-10 X 2 1/4 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• 3/4-10 X 2 3/4 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 3/4-16 X 2 1/2 Flange Bolt / Grade 8 / Fine (UNF) / Phosphorus/Oil
• 3/4-10 X 2 1/2 Flange Bolt / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 1/2-1/8 Black Pipe Bushing
• M12 X 1.75 X 45 Metric Cap Screw / Class 10.9 / Zinc Plated / Full Thread / DIN #933
• 3/4-16 X 2 1/4 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• M12 X 1.75 X 45 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• 3/4-10 X 2 1/2 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• 24-22 GA. TIN PLATED OEM TERMINAL
• 1/4-1/8 Black Pipe Bushing
• 24-22 GA. TIN PLATED MATES WITH 20748
• 3/4-10 X 1 1/2 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• GM Pop Rivet Split Type Rivet Diameter : 3/16" Grip Range : 3/64-23/64" Flange Diameter : 5/8" Black Aluminum
• M12 X 1.50 X 40 Metric Cap Screw / Class 10.9 / Plain Finish / Full Thread / DIN #961
• 3/16D X 23/64 ALUM/ALUM SPLIT TYPE RIVET LF
• 1/4-20 X 3/4 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• 3/4-10 X 2 1/4 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• M12 X 1.5 X 40 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Full Thread / DIN #961
• 1/8 Steel Merchant Coupling *Can Sub M-107A
• 3/4-10 2 1/4 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 1/4-20 X 2 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• M12 X 1.25 X 40 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Full Thread / DIN #961
• 3/4-16 X 2 1/2 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 1/4-20 X 1 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• 3/8 Cross Black Iron Pipe Thread
• M12 X 1.25 X 40 Metric Cap Screw / Class 10.9 / Plain Finish / Full Thread / DIN #961
• 1/4-20 X 1/2 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• M12 X 1.75 X 40 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• M12 X 1.75 X 40 Metric Cap Screw / Class 10.9 / Zinc Plated / Full Thread / DIN #933
• 3/4-10X 2 1/2 HEX CAP SCREW GRADE L9 YELLOW ZINC PLATED
• 1/4-20 X 1 1/4 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• 3/4-10 X 2 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 1/4-20 1 1/2 Flange Bolt / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 3/4-10 X 2 1/2 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• M12 X 1.50 X 35 Metric Cap Screw / Class 10.9 / Plain Finish / Full Thread / DIN #961
• 1/4-20 X 1 1/2 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• M12 X 1.5 X 35 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Full Thread / DIN #961
• #8 X 3 BUGLE HEAD DRY WALL SCREW SQUARE DRIVE
• 1/4-20 X 4 1/2 Stainless Steel Phillips Truss Machine Screw / Coarse (UNC) / Grade 18.8
• 1/2-13 X 5 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• 1/2 X 2 Stainless Steel Indented Hex Washer Tek Screw / Grade 410
• M12 X 1.25 X 35 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Full Thread / DIN #961
• #8X 3 PHILLIP BUGLE DRY WALL SCREW FINE
• 1/4-20 X 3 Stainless Steel Phillips Truss Machine Screw / Coarse (UNC) / Grade 18.8
• M12 X 1.25 X 35 Metric Cap Screw / Class 10.9 / Plain Finish / Full Thread / DIN #961
• 1/4-28 X 3/4 Stainless Steel Phillips Truss Machine Screw / Fine (UNF) / Grade 18.8
• 1/2-13 X 4 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• 3/4-16 X 1 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• M12 X 1.75 X 35 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• CLIP FOR RIGHT-HAND SIDE ONLY
• #8X 3 PHILLIP BUGLE DRY WALL SCREW COARSE
• 1/2-13 X 4 1/2 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• M12 X 1.75 X 35 Metric Cap Screw / Class 10.9 / Zinc Plated / Full Thread / DIN #933
• 1/4-20 X 2 1/2 Stainless Steel Phillips Truss Machine Screw / Coarse (UNC) / Grade 18.8
• NISSAN TRIM PANEL TOP 13MM BOT 18MM BLK NYLN
• 3/4-10 X 1 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• M12 X 1.0 X 30 Metric Hex Cap Screw / Plain Finish / Class 10.9 / Full Thread / DIN #961
• NISSAN TRIM PAN RET TOP 13 BOT 18 NYLN WHITE
• 1/2-13 X 3 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• 3/4-10 X 1 Hex Cap Screw / Grade 8 / Coarse (UNC) / Plain Finish
• M12 X 1.5 X 30 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Full Thread / DIN #961
• 1/4-20 X 1 Stainless Steel Phillips Truss Machine Screw / Coarse (UNC) / Grade 18.8
• 3/4-10 X 1 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 1/4-20 X 1 3/4 Stainless Steel Phillips Truss Machine Screw / Coarse (UNC) / Grade 18.8
• 1/4 STRCT WASH C
• 1/2-13 X 3 1/2 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• M12 X 1.25 X 30 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #961
• #8X 2 1/2 PHILL BUGLE DRY WALL SCREW FINE
• M12 X 1.25 X 30 Metric Cap Screw / Class 10.9 / Plain Finish / Full Thread / DIN #961
• 3/4-10 X 14 Hex Cap Screw / Grade 8 / Coarse (UNC) / Plain Finish
• 1/4-20 X 1 1/2 Stainless Steel Phillips Truss Machine Screw / Coarse (UNC) / Grade 18.8
• 1/2-20 X 2 Flange Bolt / Grade 8 / Fine (UNF) / Phosphorus/Oil
• GM Front End Stone Shield Retainer Black Nylon 7/16 stem 13/16 length
• M12 X 1.75 X 30 Metric Cap Screw / Class 10.9 / Zinc Plated / Full Thread / DIN #933
• 3/4-10 X 14 Hex Cap Screw / Grade 5 / Coarse (UNC) / Plain Finish
• 1/2-13 X 2 Flange Bolt / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• M12 X 1.75 X 30 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• Trim Panel Retainer Single Head Black Bottom Head Diameter : 1" Stem Diameter : 9/32" Stem Length : 1-7/16" Nylon
• 3/4-10X 14 HEX CAP SCREW A307 HOT DIP GALVANIZED
• #8X 1 5/8 PHILL BUGLE DRYWALL SCREW COARSE
• FASCIA RETAINER
• 10 X 2 1/2 Stainless Steel Slotted Hex Washer Tapping Screw / Grade 18.8
• 1/2-13 X 2 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• #8X 1 1/4 PHILLIP BUGLE DRYWALL SCREW COARSE
• 1/2-13 X 2 3/4 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• M12 X 1.5 X 25 Metric Cap Screw / Class 10.9 / Plain Finish / Full Thread / DIN #961
• #8X 1 1/2 PHILL BUGLE DRYWALL SCREW COARSE
• M12 X 1.5 X 25 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #961
• 1/4-18 SOCKET PIPE PLUG (7/8 TAPER) ALLOY PL
• M12 X 1.25 X 25 Metric Cap Screw / Class 10.9 / Plain Finish / Full Thread / DIN #961
• M4.2-1.41 x 20mm Hex Head Sems Tapping Screw 12mm OD Phosphate
• 1/2-13 X 2 1/4 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• M12 X 1.25 X 25 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Full Thread / DIN #961
• M12 X 1.75 X 25 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• 1/8X1 3/4 SPR PIN
• 1/2-13 X 2 1/2 Flange Bolt / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• M12 X 1.75 X 25 Metric Cap Screw / Class 10.9 / Zinc Plated / Full Thread / DIN #933
• M6X1.0 MERCEDES CLIP UNUT
• 1/2-13 X 2 1/2 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• 3/4-10 X 1 3/4 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 1/2-20 X 1 Flange Bolt / Grade 8 / Fine (UNF) / Phosphorus/Oil
• 3.5MM (#6)SCREW SIZE
• GM Door Trim Panel White Nylon 51/6 stem, 3/4 length
• 1/2-14 SOCKET PIPE PLUG (3/4 TAPER PER FOOT)
• 3/4-10 X 1 3/4 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 1/2-13 X 1 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• M10 X 1.5 X 20 Metric Cap Screw / Class 10.9 / Plain Finish / Full Thread / DIN #961
• #6X 1 PHILL BUGLE DRY WALL SCREW COARSE
• GM Seat Back Plastic Retainer Head Dia : 25/32" Stem Dia: 5/16" Stem Length : 15/16" Nylon
• 1/2-13 X 1 3/4 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• M12 X 1.5 X 20 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Full Thread / DIN #961
• 1/2-13 X 1 1/4 Flange Bolt / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• M12 X 1.25 X 20 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Full Thread / DIN #961
• M12 X 1.5 WHEEL NUT ZINC W.A.F. = 19MM HEIGHT = 14MM
• 1/2-13 X 1 1/4 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• 1/4-20X 1 1/2 STEP BOLT A307 ZINC PLATED
• 3/4-10 X 12 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 1/4-20X 1 1/2 STAINLESS STEEL SLOTTED HEX WASHER MACH SCREW 18.8
• #6X 1 5/8 PHILL BUGLE DRY WALL SCREW COARSE
• M12 X 1.75 X 20 Metric Cap Screw / Class 10.9 / Zinc Plated / Full Thread / DIN #933
• 1/2-20 X 1 1/2 Flange Bolt / Grade 8 / Fine (UNF) / Phosphorus/Oil
• M12 X 1.75 X 20 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• 1/2-13 X 1 1/2 Flange Bolt / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• M12 X 1.5 STAINLESS CAP WHEEL NUT W.A.F. = 19MM HEIGHT = 34MM
• 3/4-10X 12 HEX CAP SCREW GRADE A307 ZINC PLATED
• #6X 1 1/4 PHILL BUGLE DRY WALL SCREW FINE
• 1/2-13 X 1 1/2 Flange Bolt / Grade 8 / Coarse (UNC) / Phosphorus/Oil
• M6-1.0 X 20 Hex Head Sems Screw Body Bolt Washer 17mm Phosphate
• 3/4-10 X 12 HEX CAP SCREW GRADE 2 GALVANIZED
• M12 X 1.75 X 200 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• PM-STICK-1400-20 (AIR BRAKE 1400 STICKERS)
• PHIL RD MACH SCREW
• M12 X 1.25 X 180 Metric Cap Screw / Class 10.9 / Plain Finish / Partial Thread / DIN #960
• 3/4 SPRING CLAMP
• #8-32 X 7/8 Phillips Pan Machine Screw / Coarse (UNC) / Zinc Plated
• M12 X 1.75 X 180 Metric Cap Screw / Class 10.9 / Zinc Plated / Partial Thread / DIN #931
• 11/16 SPRING ACTION HOSE CLAMP(ASSTHC#1,20PCS
• 3/4-16 X 1 1/4 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• #8-32 X 5/8 Phillips Pan Machine Screw / Coarse (UNC) / Zinc Plated
• PAN TAP SCREW PHIL-COTTER PIN IN DL24-C
• 1/4X9 BAT HOLD
• 5/8 Spring Action Hose Clamp
• 9/16 Spring Action Hose Clamp
• #8-32 X 3/8 Phillips Pan Machine Screw / Coarse (UNC) / Zinc Plated
• 3/4-10 X 1 1/4 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 20 MM HEAD 8 MM HOLE
• 1/2 Spring Hose Clamp Free Inside Dia: 0.460" Max. Width : 5/16" Spring Steel, Heat Treated Finish : Phosphate & Red Paint
• 5/8-11X 7 SQUARE HD SET SCREW CUP POINT PLAIN FINISH
• M12 X 1.5 X 16 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Full Thread / DIN #961
• 3/4-10 X 1 1/4 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 5/16X9 1/4 BAT HO
• DOOR LATCH GUIDE
• M12 X 1.75 X 16 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• 7/16 Spring Action Hose Clamp
• 3/4-16 X 1 1/2 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• M12 X 1.75 X 160 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Partial Thread / DIN #931
• 3/8 Spring Action Hose Clamp
• 6-8-10 METRIC
• #8-32X 2 1/2 PHILLIPS PAN MACHINE SCREW ZINC PLATED
• #8-32X1 PHILLIPS PAN HEAD MACHINE SCREW ZINC PLATED
• M12 X 1.75 X 150 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Partial Thread / DIN #931
• M12 X 1.5 WHEEL NUT ZINC W.A.F. = 19MM HEIGHT = 14MM
• WIND MOLDING CLIP
• M12 X 1.75 X 150 Metric Cap Screw / Class 10.9 / Plain Finish / Partial Thread / DIN #931
• FORD FENDER RETAINER HEAD 18MM STEM LEN 33MM
• M12 X 1.75 X 150 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• 3/8-1/2 Hose Barb Brass
• 3/4-10 X 1 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• GM WEATHER PACK SEAL USE W/18324 & 18325
• #8-32X1/2 PHILLIPS PAN MACHINE SCREW ZINC PLATED
• HEX WASHER TAP 24
• 3/8-3/8 Coupling Brass
• 3/4-10 X 1 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Zinc Plated / Nylon Patch
• 5/8-11X 2 1/2 SQUARE HEAD SOCKET SET SCREW CUP PT PLAIN
• 3/8-1/4 Coupling Brass
• 3/4-10 X 1 1/2 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 3/8-1/8 Coupling Brass
• M12 X 1.75 X 130 Metric Cap Screw / Class 10.9 / Zinc Plated / Partial Thread / DIN #931
• #6-32 X 5/8 Phillips Pan Machine Screw / Coarse (UNC) / Zinc Plated
• M6-1.0 Extruded U Nut Panel Range : 0.8-4.00mm Center of Hole to Edge : 13.5mm
• 3/4-10 X 11 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Plain Finish
• 5/16X3/4 SQUARE HEAD SOCKET SET SCREW PLAIN FINISH
• 1/2-5/8-3/4 GRADE 8 IN ADL-C
• M8-1.25 EXT U NUT
• #6-32 X 3/8 Phillips Pan Machine Screw / Coarse (UNC) / Zinc Plated
• 5/32X1/4 STL/STL DOME BLIND RIVET
• 10MMX14MM GRILLE PUSH RETAINER BLACK
• 3/4-10 X 10 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 5/16-3/8 Coupling Brass
• #6-32 X 3/4 PHILLIPS PAN MACHINE SCREW ZINC PLATED
• 5/16 1/4 Coupling Brass
• #6-32 X 3/16 PHILLIPS PAN MACHINE SCREW ZINC PLATED
• 5/16 1/8 Coupling Brass
• M12 X 1.75 X 120 Metric Cap Screw / Class 10.9 / Zinc Plated / Partial Thread / DIN #931
• #6-32 X 2 Phillips Pan Machine Screw / Coarse (UNC) / Zinc Plated
• 5/16 PUSH ON RETN
• M12 X 1.75 X 120 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• 3/8X6 BENT EYE BOLT CARBON STEEL ZINC PLATED
• 8 Gauge 5/16 Stud Battery Copper Lug
• #6-32 X 1/4 Phillips Pan Machine Screw / Coarse (UNC) / Zinc Plated
• 3/8X3/4 SQUARE HEAD SOCKET SET SCREW PLAIN FINISH
• 8 Gauge 3/8 Stud Battery Copper Lug
• #6-32 X 1/2 Phillips Pan Machine Screw / Coarse (UNC) / Zinc Plated
• 1/4" Aluminum/Steel Grip Range : 9/64-3/16" Flange Dia: 1/2"
• PUSH ON RETAINER
• 8GA 1/4 Stud Battery Copper Lug
• 3/8X 3 FORGED EYE BOLT W/NUT HOT DIP GALVANIZED
• 3/8-16X 1 SQUARE HEAD SOCKET SET SCREW CUP POINT PLAIN FINISH
• 5/32 7/16 O.D. FLAT PUSH ON RETAINER
• M12 X 1.75 X 110 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Partial Thread / DIN #931
• 1/4D 1/8G RIVET
• 3/8-16X 1 3/4 SQUARE HEAD SOCKET SET SCREW CUP POINT PLAIN FINISH
• 1/8 I.D.(3/8 O.D.)FLAT PUSH ON RETAINER ZINC
• 8 Gauge #10 Stud Battery Copper Lug
• M12 X 1.75 X 110 Metric Cap Screw / Class 10.9 / Zinc Plated / Partial Thread / DIN #931
• 6 Gauge 5/16 Stud Battery Copper Lug
• 3/8-16 X 1 1/4 SQUARE HEAD SET SCREW PLAIN FINISH
• 6 Gauge 3/8 Stud Battery Copper Lug
• M12 X 1.75 X 110 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• 1/4-1/8 Coupling Brass
• ASLN Coarse (UNC) Fine (UNF) IN ADL-C
• 6 Gauge 1/4 Stud Battery Copper Lug
• 1/2-20 HEX PAL NUT ZINC
• DOOR PANEL & ROCKER RETAINER YELL/WHT NYL
• 3/4-10X 4 EYE BOLT W/NUT HOT DIP GALVANIZED
• M12 X 1.5 X 100 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Partial Thread / DIN #960
• 1/4 1/4 Coupling Brass
• 6 Gauge 1/2 Stud Battery Copper Lug
• 5/32 STUD,3/8 HEX,9/16 WASHER DIAMETER
• 3/4-10X2 PLAIN FINISH PATTERN EYE BOLT 1030
• 1/4-1/8 Coupling Brass
• 4 Gauge 5/16 Stud Battery Copper Lug
• M10 X 1.5 X 100 Metric Cap Screw / Class 10.9 / Plain Finish / Full Thread / DIN #961
• 4 Gauge 3/8 Stud Battery Copper Lug
• 40 HOLE 8-1/2 QUANITY OF REGULAR SAE FLATS
• 5/16-18 x 1 1/4 Hex Washer Sems Screw with Dog Point Black
• 3/4-10X 5 1/2 SQUARE HEAD SOCKET SET SCREW CUP POINT PLAIN FINISH
• M12 X 1.25 X 100 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Partial Thread / DIN #960
• 3/16-1/4 Coupling Brass
• 4 Gauge 1/4 Stud Battery Copper Lug
• 1/2 REINFORCED E" REATINER RING"
• 2-8X 5 HEAVY HEX BOLT A193 B7 PLAIN FINISH
• 17MM HD (5/16X9MM) HONDA PUSH RETAINER BLACK
• 3/16 1/8 Coupling Brass
• 3/32 REINFORCED E" RETAINER RING"
• M12 X 1.75 X 100 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Partial Thread / DIN #931
• 4/0 Gauge 3/8 Stud Battery Copper Lug
• 24 Hole Stainless Cap Screw Assortment Grade 18.8 1/4 to 3/8 w/nuts, locks & flats in BINDL24-C #102 large metal drawer
• 1 3/8 E" RETAINER RING"
• M12 X 1.75 X 100 Metric Cap Screw / Class 10.9 / Zinc Plated / Partial Thread / DIN #931
• 4/0 Gauge 1/2 Stud Battery Copper Lug
• 1 3/16 E" RETAINER RING"
• BODY SIDE MOULDING CLIP VOLVO
• 1/4X4 BENT EYE BOLT ZINC PLATED
• 3/0 Gauge 3/8 Stud Battery Copper Lug
• M10 X 1.25 X 90 Metric Cap Screw / Class 10.9 / Plain Finish / Partial Thread / DIN #960
• 3/0 Gauge 1/2 Stud Battery Copper Lug
• 1/8-1/4 Hose Barb Brass
• 3/4 2 1/2 SQUARE HEAD SOCKET SET SCREW CUP POINT
• M10 X 1.25 X 90 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Partial Thread / DIN #960
• 2 Gauge 5/16 Stud Battery Copper Lug
• 3/4 "E" RETAINER RING"
• 1/8-1/8 Coupling Brass
• 1-8X 6 SQUARE HEAD SOCKET SET SCREW CUP POINT PLAIN FINISH
• MOULDING CLIP TOY, PONT. LEXUS 13MMHEAD 18LGT
• M10 X 1.25 X 90 Metric Cap Screw / Class 10.9 / Plain Finish / Full Thread / DIN #961
• 2 Gauge 3/8 Stud Battery Copper Lug
• 7/16 E" RETAINER RING"
• M10 X 1.5 X 90 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Partial Thread / DIN #931
• 2 Gauge 1/4 Stud Battery Copper Lug SUB PART # 5953-010D
• 3/8 "E" RETAINER RING"
• 16GA UN FUSE LINK
• PHIL HEX SEM M6.3-1.81 X 20MM WASH OD 20MM
• 1-8X 4 SQUARE HEAD SOCKET SET SCREW CUP POINT PLAIN FINISH
• M10 X 1.5 X 90 Metric Cap Screw / Class 10.9 / Zinc Plated / Partial Thread / DIN #931
• 2 Gauge 1/2 Stud Battery Copper Lug
• 1/4 E" RETAINER RING"
• 2/0 Gauge 5/16 Stud Battery Copper Lug
• 3/16 E" RETAINER RING"
• 1/8 E" Retaining Ring Groove Diameter : 0.095" Groove Width : 0.018" Phos & Oil
• 2/0 Gauge 3/8 Stud Battery Copper Lug (5956-010F)
• M12 X 1.5 WHEEL NUT ZINC CHRYSLER W.A.F. = 19MM HEIGHT = 23MM
• 2/0 Gauge 1/2 Stud Battery Copper Lug
• M10 X 1.5 X 90 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• 1/16 E" RETAINER RING"
• 1 Gauge 5/16 Stud Battery Copper Lug
• 12599 PIGTAIL
• M10 X 1.25 X 85 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Partial Thread / DIN #960
• 5/16-18 Extruded U-Nut Panel Range : 0.025-0.150" Center of Hole to Edge : 27/32"
• 1 Gauge 3/8 Stud Battery Copper Lug
• SINGLE CONTACT W/ GROUND SOCKET ASSEMBLY
• 7/16-14 Stainless Steel Wing Nut / Grade 18.8
• 1 Gauge 1/2 Stud Battery Copper Lug
• M6X1.0 WASHER NUT
• 16-14 GA BLUE FEMALE DISCONNECT .187 TAB
• 1/2X1 1/2 FORGED SHOULDER PATTERN EYE BOLT
• M10 X 1.25 X 80 Metric Cap Screw / Class 10.9 / Plain Finish / Partial Thread / DIN #960
• M6-1.0 Washer Nut Across Flats : 10mm Overall Height : 7mm Washer Dia: 16mm Washer Type : Toothed Phosphate
• 1/0 Gauge 5/16 Stud Battery Copper Lug
• HOOD INSULATION RETAINER HYUNDAI-SONATA-KIA
• 5/16-18 Stainless Steel Wing Nut / Grade 18.8
• M10 X 1.25 X 80 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Partial Thread / DIN #960
• 1/2X3 SQUARE HEAD SOCKET SET SCREW CUP POINT
• 1/2-13X1 1/2 FORGED PLAIN FINISH PATTERN EYE BOLT PLAIN FINISH
• 1/0 Gauge 3/8 Stud Battery Copper Lug
• 1/4-20 X 3 Phillips Pan Machine Screw / Coarse (UNC) / Zinc Plated
• 3/8-16 Stainless Steel Wing Nut / Grade 18.8
• 1/2-3/4 Coupling Brass
• 1/0 Gauge 1/2 Stud Battery Copper Lug
• M10 X 1.5 X 80 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• 1/4-20 Stainless Steel Wing Nut / Grade 18.8
• 1/2-1/2 Coupling Brass
• 1/2X2 1/4 SQUARE HEAD SOCKET SET SCREW CUP POINT PLAIN FINISH
• M10 X 1.5 X 80 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Partial Thread / DIN #931
• 1/2-13X2 1/2 SQUARE HEAD SOCKET SET SCREW CUP POINT PLAIN FINISH
• 1/2-3/8 Coupling Brass
• M10 X 1.5 X 80 Metric Cap Screw / Class 10.9 / Zinc Plated / Partial Thread / DIN #931
• 1/2-1/4 Coupling Brass
• 1/2-13X 1 SQUARE HEAD SOCKET SET SCREW CUP POINT PLAIN FINISH
• .31-.56 Extended Tongue Hose Clamp
• M10 X 1.25 X 75 Metric Cap Screw / Class 10.9 / Plain Finish / Partial Thread / DIN #960
• 2 1/4-4 1/2X 9 HEAVY HEX BOLT A449 PLAIN FINISH
• 1/2-13X 1 1/4 SQUARE HEAD SOCKET SET SCREW CUP POINT PLAIN FINISH
• M10 X 1.25 X 75 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Partial Thread / DIN #960
• 5/8 Silicone Extended Tongue Hose Clamp
• 4 x 6 White Window Bag
• 205-12-12 BRASS
• 3 x 4 Zip Window Bag
• 1/4-20X 1/2 PHILLIPS PAN MACHINE SCREW ZINC PLATED
• M10 X 1.5 X 75 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Partial Thread / DIN #931
• M6-1.0 Extruded Nut Panel Range : 0.8-4.00mm Center of Hole to Edge : 19.5mm
• 1/4-20 X 1 1/4 Phillips Pan Machine Screw / Coarse (UNC) / Zinc Plated
• M10 X 1.5 X 75 Metric Cap Screw / Class 10.9 / Zinc Plated / Partial Thread / DIN #931
• 3 1/8 Silicone Extended Tongue Hose Clamp
• PAN RET/ PUSH PIN
• 3/8X1/2 Coupling Brass
• 2 13/16 Silicone Extended Tongue Hose Clamp
• M10 X 1.5 X 75 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• 3/8-3/8 Coupling Brass
• 2 9/16 Silicone Extended Tongue Hose Clamp
• M4.2-1.41 x 20 Hex Washer Sems Tek Screw Black Phosphate
• 7/16 - 20 R.H. WHEEL NUT ZINC W.A.F. = 3/4" HEIGHT = 9/16"
• 3/8-1/4 Coupling Brass
• #906 INDUSTRIAL LIGHT BULBS
• 1/2 - 20 R.H. WHEEL NUT ZINC W.A.F. = 13/16" HEIGHT = 5/8"
• 1/2-20 R.H. WHEEL NUT W.A.F = 3/4" HEIGHT = 9/16"
• 3/8-1/8 Coupling Brass
• 2 5/16 Silicone Extended Tongue Hose Clamp
• 20X1000' SHRINK WRAP 80 GAUGE
• 2 1/16 Silicone Extended Tongue Hose Clamp
• 3/8 WASHER CAP NUT CAP OD .419 WASH OD 11/16
• M10 X 1.0 X 70 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Partial Thread / DIN #960
• 1/4" GM Push Retainer Mud Skirt Head Dia : 11/16" Stem Length : 9/16" Black
• 9006/HB4 LOW BEAM HEADLIGHT ASSEMBLIE 55 WATT
• M10 X 1.5 X 70 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Partial Thread / DIN #931
• 1 1/4 EXT RETN RG
• 1 13/16 Silicone Extended Tongue Hose Clamp
• Ford Door Trim Panel Retainer Black Nylon 5/16 stem, 5/8 length
• M10 X 1.5 X 70 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• 1 1/8 EXR RETN RG
• HIGH BEAM IN DUAL HEADLIGHT ASSEMBLIES
• 3/4 X 60' Electrical Tape / White
• 1 EXT SNAP RING"
• 5/16X3/8 Hose Barb Brass
• 1-14 X 9 Hex Cap Screw / Grade 8 / Fine (UNF) / Plain Finish
• 1 X 50 Yrd Shop Roll 220 Grit
• M10 X 1.5 X 70 Metric Cap Screw / Class 10.9 / Zinc Plated / Partial Thread / DIN #931
• 7/8 EXT SNAP RING
• 3/4 X 60' Electrical Tape / Red
• 5/16-1/4 Coupling Brass
• 1-8 X 9 Hex Cap Screw / Grade 8 / Coarse (UNC) / Plain Finish
• 3/4 EXT RETN RING
• M10 X 1.25 X 65 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Partial Thread / DIN #960
• 5/8 EXT RETAINING RING
• MAZDA NYLON RIVET,M19.5 HD, M15 LONG
• M10 X 1.5 X 65 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• 3/4 X 15' Linerless Electrical Rubber Tape / Black
• 1-8 X 9 Hex Cap Screw / Grade 5 / Coarse (UNC) / Plain Finish
• 5/8-11 X 6' Stainless Steel Threaded Rod / Grade 18.8
• 9/16 EXT RETAIN RING
• 1 1/2 X 50 Yrd Shop Roll 120 Grit
• TYPE 2(REPLACES 194A)
• M10 X 1.5 X 65 Metric Cap Screw / Class 10.9 / Plain Finish / Partial Thread / DIN #931
• 3/4 X 60' Electrical Tape / Green
• 5/8-11 X 3' Stainless Steel Threaded Rod / A193 B8M CL 1
• 1/2 EXT RETAIN RING GROOVE .468, WIDTH .039
• ALUMINUM-OIL DRAIN PLUG CRUSHABLE GASKET
• 1-14 X 9 1/2 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 1 1/2 X 50 Yrd Shop Roll 100 Grit
• 7/16 EXT RETAIN RING
• M10 X 1.25 X 60 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Partial Thread / DIN #960
• 1-8 X 9 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Plain Finish
• TYPE 5 BULB, REPACES BULB 1893
• 1 X 50 Yrd Shop Roll 80 Grit
• 3/4 X 60' Electrical Tape / Blue
• 1 1/2 X 50 Yrd Shop Roll 80 Grit
• M10 X 1.25 X 60 Metric Cap Screw / Class 10.9 / Plain Finish / Partial Thread / DIN #960
• 5/16 EXTERNAL RETAIN RING
• 10X1 1/2 OVL TS P
• 1/4 EXTERNAL RETAINING RING
• 3/4 x 60' 3M Electrical Tape / Black
• 1 1/2 X 50 Yrd Shop Roll 40 Grit
• M10 X 1.0 X 60 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Partial Thread / DIN #960
• 3/8-3/8 COUPLING BRASS
• 3/4 X 60' 3M Electrical Tape
• SIDE RADIATOR SHIELD PUSH RETAINER
• 1/4-1/2 Coupling Brass
• 1 1/4 INT RING
• 1-8 X 8 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 1 9/16 Silicone Extended Tongue Hose Clamp
• 9/16-12 SLOTTED HEX NUT GRADE 5 PLAIN FINISH
• M10 X 1.5 X 60 Metric Cap Screw / Class 10.9 / Zinc Plated / Partial Thread / DIN #931
• 1/4 3/8 Coupling Brass
• 1 1/8 Internal Retaining Ring
• 1 5/16 Silicone Extended Tongue Hose Clamp
• 1-8 X 8 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 5/16-18 X 3' Stainless Steel Threaded Rod / Grade 18.8
• 1/4-1/4 Coupling Brass
• COPPER-OIL DRAIN PLUG CRUSHABLE GASKET
• 1 INT RET RING GROOVE 1.066
• 7/8-9 SLOTTED HEX NUT GRADE 5 PLAIN FINISH
• 1/4-1/8 Coupling Brass
• 1 3/16 Silicone Extended Tongue Hose Clamp
• Auveco Catalog
• M10 X 1.5 X 60 Metric Cap Screw / Class 10.9 / Plain Finish / Partial Thread / DIN #931
• 7/8 INT RET RING .931 GROOVE, .046 THICK
• 7/16-20 SLOTTED HEX NUT GARDE 5
• 13mm I.D 22mm O.D Ford Rubber Oil Drain Gasket
• 1 1/8 Silicone Extended Tongue Hose Clamp
• M10 X 1.5 X 60 Metric Cap Screw / Class 10.9 / Zinc Plated / Full Thread / DIN #933
• 3/4 Internal Retaining Ring
• 7/16-14 SLOTTED HEX NUT COARSE ZINC
• 13/16 Silicone Extended Tongue Hose Clamp
• 3/8-16 X 6' Stainless Steel Threaded Rod / Grade 18.8
• 5/8-11 SLOTTED HEX NUT GRADE 5 PLAIN FINISH
• M10 X 1.5 X 60 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• 9/16 Silicone Extended Tongue Hose Clamp
• 1-5 x 6' Acme Threaded Rod Plain Finish
• 5/16-18 SLOTTED HEX NUT GRADE 5 PLAIN FINISH
• M10 X 1.25 X 55 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Partial Thread / DIN #960
• 1-8X 7 HEX CAP SCREW GRADE L9 YELLOW ZINC PLATED
• 3/4 Silicone Extended Tongue Hose Clamp
• 10 AMP GLASS FUSE
• 3/8-16 SLOTTED HEX NUT GRADE 5 PLAIN FINISH
• M10 X 1.5 X 55 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Partial Thread / DIN #931
• 1-8 X 7 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 4 External Retaining Ring / (.109 THK) / Plain Finiish
• M10 X 1.5 X 55 Metric Cap Screw / Class 10.9 / Zinc Plated / Partial Thread / DIN #931
• 1 1/4-5 x 3' Acme Threaded Rod Plain Finish
• M10 X 1.5 X 55 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• 3/4-10 X 6' Stainless Steel Threaded Rod / Grade / Grade 18.8
• 20mm Toyota Hood/Fender Grommet Screw Size : M5.5 Stem Length : 18mm Black Nylon
• 3 1/4 EXTERNAL RETINING RING (.093 THK) / Plain Finiish
• 3/4-10 SLOTTED HEX NUT GARDE 5 PLAIN FINISH
• 3 1/2 EXTERNAL RETINING RING (.109 THK) / Plain Finiish
• 12 Gauge 3-30 Amp ATO Fuse Holder with Weather Resistent Cap
• M10 X 1.25 X 50 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Full Thread / DIN #961
• 3 External Retaining Ring / (.093 THK) / Plain Finiish
• M6-1.0X12 HEX HEAD SEMS BODY BOLTS
• 16 Gauge 10 Amp ATC/ATO Fuse Holder with 7" Wire Loop
• M10 X 1.25 X 50 Metric Cap Screw / Class 10.9 / Plain Finish / Partial Thread / DIN #960
• 25/32 External Retaining Ring / (MS-16624)
• 12 Gauge 30 Amp ATC/ATO Fuse Holder with 7" Wire Loop
• M10 X 1.0 X 50 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Partial Thread / DIN #960
• 1-14 X 6 Hex Cap Screw / Grade 8 / Fine (UNF) / Plain Finish
• 2 3/4 External Retaining Ring / (.093 THK) / Plain Finiish
• TOYOTA MOULDING CLIP 17MM HEAD, 17 MM STEM
• ATO/ATC Fuse Converter 10 Amp (Add a Circuit)
• M10 X 1.5 X 50 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Partial Thread / DIN #931
• 2 1/2 External Retaining Ring / (.078 THK) / Plain Finiish
• 1-8 X 3' Stainless Steel Threaded Rod / A193 B8M CL 1
• 3/8 SEALING PLUG BRASS
• M10 X 1.5 X 50 Metric Cap Screw / Class 10.9 / Zinc Plated / Full Thread / DIN #933
• 7 1/2 Amp ATO/ATC Fuse
• 1-8 SLOTTED HEX NUT GRADE 5 PLAIN FINISH
• 1-8 X 3' Stainless Steel Threaded Rod / Grade 18.8
• 5/16 SEALING PLUG BRASS
• M14-1.4X17MM HEX OIL DRAIN PLUG (ACURA/HONDA)
• 1-8 X 6 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 1/4-20 SLOTTED HEX NUT GRADE 5 PLAIN FINISH
• 5 Amp ATO/ATC Fuse
• 1 1/4 Heavy Duty External Retaining Ring / / .093
• 1/4 SEALING PLUG BRASS
• 1/4-28 X 6' Stainless Steel Threaded Rod / Grade 18.8
• M10 X 1.5 X 50 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• 4 Amp ATO/ATC Fuse
• 9/16 INT RET RING
• 3/16 SEALING PLUG BRASS
• 1 3/8-6 SLOTTED HEX NUT GRADE 5 PLAIN FINISH
• M10 X 1.25 X 45 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Partial Thread / DIN #960
• 1-8 X 6 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 40 Amp ATO/ATC Fuse
• 1/8-1/8 90' ELBOW BRASS
• 1/4-20 X 6' Stainless Steel Threaded Rod / Grade 18.8
• 3 Amp ATO/ATC Fuse
• 5/32-1/8 90' ELBOW BRASS
• 1/8-1/4 Coupling Brass
• 1/2-13 SLOTTED HEX NUT GRADE 5 PLAIN FINISH
• SWIVEL COUPLING BRASS
• 30 Amp ATO/ATC Fuse
• 1-8 X 6 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• M10 X 1.25 X 45 Metric Cap Screw / Class 10.9 / Plain Finish / Full Thread / DIN #961
• 2 Amp ATO/ATC Fuse
• 7/16 Internal Retaining Ring
• 25 Amp ATO/ATC Fuse
• 1-14 X 5 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• M10 X 1.5 X 45 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Partial Thread / DIN #931
• 20 Amp ATO/ATC Fuse
• TOYOTA FENDER MOULDING CLIP 17MM HEAD 13 STEM
• 5/16 Internal Retaining Ring
• 1-14 X 5 Hex Cap Screw / Grade 5 / Fine (UNF) / Zinc Plated
• M10 X 1.5 X 45 Metric Cap Screw / Class 10.9 / Zinc Plated / Partial Thread / DIN #931
• 3/4 - 16 OUTER R.H. WHEEL CAP NUT ZINC W.A.F. = 1 1/2" HEIGHT = 7/8"
• 1 Amp ATO/ATC Fuse
• 1/4 Internal Retaining Ring
• M10 X 1.5 X 45 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• 15 Amp ATO/ATC / Blue Fuse /
• 1/8-1/8 MALE CONNECTOR
• 1-8 X 5 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 3/4-16 R.H. INNER WHEEL CAP NUT ZINC OUTER THRD 1 1/8"-16 W.A.F. = 13/16" HEIGHT = 2-7/32"
• 10 Amp ATO/ATC Fuse
• M10 X 1.25 X 40 Metric Cap Screw / Class 10.9 / Plain Finish / Full Thread / DIN #961
• 1/8 Tube to 1/16 Male Pipe Transmission Connector Fitting Brass Fuller No. 84001
• 1-8 X 5 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 1 1/2-6 SLOTTED HEX NUT GRADE 8 PLAIN FINISH
• 1/8-10/32 Coupling Brass
• 5/32 1/8 CONNECTOR BRASS
• 1/2-13 X 3' Stainless Steel Threaded Rod / Grade 18.8
• M10 X 1.25 X 40 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #961
• 5/32 Tube 1/16 Pipe Male Connector Brass
• 3/8-1/4 PUSH TO CONNECT MALE ELBOW
• M10 X 1.0 X 40 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Full Thread / DIN #961
• 3/4-16 INNER THRD 1 1/8" - 16 OUTER THRD WHEEL CAP NUT L.H. ZINC W.A.F. = 13/16" HEIGHT = 2-7/32"
• 1-14 X 5 1/2 HE X CAP SC GRADE 8 Fine (UNF) / Yellow Zinc Plated
• Push Mount Cable Tie for Import Length : 200MM Width : 5MM Bundle Diameter : 44MM Max. Hole Size : 6.3MM Black Nylon
• #8-32 X 3/4 Stainless Steel Hex Machine Screw / Grade 18.8
• 1/4-1/4 PUSH TO CONNECT MALE ELBOW
• 1-14 X 5 1/2 Hex Cap Screw / Grade 5 / Fine (UNF) / Zinc Plated
• #8-32 X 1 Stainless Steel Hex Machine Screw / Grade 18.8
• 1 1/4-7 X 3' Stainless Steel Threaded Rod A193 B8M CL 1
• 1/4-1/8 PUSH TO CONNECT MALE ELBOW
• 8MM METRIC SET SCREW SHAFT COLLAR BLACK OXIDE
• M10 X 1.5 X 40 Metric Cap Screw / Class 10.9 / Zinc Plated / Full Thread / DIN #933
• 1-1" Hose Barb Coupling Brass
• 1/8 TUBE X 1/8 PIPE 90 DEGREE ELBOW (NOT D.O.T RATED)
• #8-32 X 1/2 Stainless Steel Hex Machine Screw / Grade 18.8
• 3/8-1/4 PUSH TO CONNECT MALE CONNECTOR
• #8-32 X 1 1/2 Stainless Steel Hex Machine Screw / Grade 18.8
• M10 X 1.5 X 40 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• 1-8 X 5 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 3/4-1/2 Coupling Brass
• 1/4-1/4 PUSH TO CONNECT MALE CONNECTOR
• 1-8 X 5 1/2 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 1/2 WSH PUSHNUT
• 1/4-1/8 PUSH TO CONNECT MALE CONNECTOR
• 5MM METRIC SET SCREW SHAFT COLLAR BLK/OX
• END MILL 11/16 4-FLUTE DOUBLE END
• M10 X 1.25 X 35 Metric Cap Screw / Class 10.9 / Plain Finish / Full Thread / DIN #961
• ENG/FRONT END PUSH RETAINER (BUICK) BLACK NYL
• 5/8-1/2 Coupling Brass
• 9/16 External Tooth Lock Washer Zinc Plated
• M10 X 1.25 X 35 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Full Thread / DIN #961
• 1/8X1/8 TUBE TO MAL PIPE CONNECTOR (NOT D.O.T RATED)
• 5/8-3/8 Coupling Brass
• M10 X 1.0 X 35 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Full Thread / DIN #961
• #8 External Tooth Lock Washer Zinc Plated
• M10 X 1.0 X 35 Metric Cap Screw / Class 10.9 / Plain Finish / Full Thread / DIN #961
• 7/8 External Tooth Lock Washer Zinc Plated
• 1/8 PUSH TO CONNECTOR UNION (NOT D.O.T RATED)
• 1-8 X 4 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 1/4-20 STAINLESS STEEL TEE NUT 4 PRONG 18.8
• M10 X 1.5 X 35 Metric Cap Screw / Class 10.9 / Zinc Plated / Full Thread / DIN #933
• 7/16 External Tooth Lock Washer Zinc Plated
• 5/16 COMP UNION BRASS
• 1-8 X 4 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 1/4 45 degree Street Elbow Brass
• 5/8 External Tooth Lock Washer Zinc Plated
• M10 X 1.5 X 35 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• 1/8 45 degree Street Elbow Brass
• 5/16 External Tooth Lock Washer Zinc Plated
• M10 X 1.25 X 30 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #961
• 5/32 COUPLING BRASS
• 1-14 X 4 1/2 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 3/8 Countersunk External Tooth Lock Washer Zinc Plated
• STAINLESS STEEL METRIC 25MM SET SCREW SHAFT COLLAR
• M10 X 1.25 X 30 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Full Thread / DIN #961
• 1/8 UNION COUPLAIN FINISHG BRASS
• 3/8 External Tooth Lock Washer Zinc Plated
• M10 X 1.25 X 30 Metric Cap Screw / Class 10.9 / Plain Finish / Full Thread / DIN #961
• 5/32 NUT
• 1-8 X 4 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 3/4 External Tooth Lock Washer Zinc Plated
• 1/4 External Tooth Lock Washer Zinc Plated
• M12 X 1.75 OIL DRAIN PLUG W/ RUBBER GASKET
• 5/32 SLEEVE BRASS
• T-10 INSERT BIT
• 1/8 SLEEVE BRASS
• 1/2 External Tooth Lock Washer Zinc Plated
• 5/8 Tube to 1/2 Male PIpe Swivel Push Connect 45 Degree Elbow
• M10- 1.5 x 30 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• 1/2 Tube to 1/2 Male Pipe D.O.T. Push To Connect 45 Degree Elbow
• M10 X 1.5 X 30 Metric Cap Screw / Class 10.9 / Zinc Plated / Full Thread / DIN #933
• MOULDING FASTENER
• 1/2 Tube to 1/4 Male Pipe D.O.T. Push To Connect 45 Degree Elbow
• M10 X 1.25 X 25 Metric Cap Screw / Class 10.9 / Plain Finish / Full Thread / DIN #961
• 1-8 X 3 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 3/8 Tube to 3/8 Male Pipe D.O.T. Push To Connect 45 Degree Elbow
• 18mm Toyota Fender Liner Push Retainer Stem Length : 7mm Hole Size : 7mm Black
• 3/8 Tube to 1/4 Male Pipe D.O.T. Push To Connect 45 Degree Elbow
• 1-8 X 3 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• M10 X 1.0 X 25 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Partial Thread / DIN #960
• 7/16X1 BUMPER BT
• 5/16-18 Stainless Steel Heavy Hex Nut / Grade 18.8 / Coarse (UNC)
• 3/8 Tube to 1/8 Male Pipe D.O.T. Push To Connect 45 Degree Elbow
• M10 X 1.5 X 25 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• 12MM SET SCREW SHAFT COLLAR BLACK OXIDE
• 1/4 Tube to 1/4 Male Pipe D.O.T. Push To Connect 45 Degree Elbow
• M10 X 1.5 X 25 Metric Cap Screw / Class 10.9 / Zinc Plated / Full Thread / DIN #933
• 3/8-16 Stainless Steel Heavy Hex Nut / Grade 18.8 / Coarse (UNC)
• 11OZ TUBE TAPMATIC EDGE CREAM (LPS)
• 1/4 Tube to 1/8 Male Pipe D.O.T. Push To Connect 45 Degree Elbow
• 3/4-10 Stainless Steel Heavy Hex Nut / Grade A194 B8 / Coarse (UNC)
• 1/4 X 2 HAMMER LOCK COTTER PIN ZINC
• 5/8 Tube to 1/2 Male Pipe D.O.T. Push To Connect 45 Degree Elbow
• 1-14 X 3 3/4 Hex Cap Screw / Grade 5 / Fine (UNF) / Plain Finish
• M10 X 1.25 X 22 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Full Thread / DIN #961
• 3/4-10 Stainless Steel Heavy Hex Nut / Grade 316 / Coarse (UNC)
• 1 3/8-1 1/4 WITH 5/8 SLOT 1/8 THICK SHIM
• M10 X 1.25 X 20 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Full Thread / DIN #961
• M10 X 1.25 X 20 Metric Cap Screw / Class 10.9 / Plain Finish / Full Thread / DIN #961
• 3/4-10 Stainless Steel Heavy Hex Nut / Grade 18.8 / Coarse (UNC)
• 3/8 Tube to 3/8 Male Pipe Swivel Push Connect Tee
• 1/8 ALIGN SHIM
• M10 X 1.0 X 20 Metric Hex Cap Screw / Class 8.8 / Plain Finish / Full Thread / DIN #961
• 3/8 Tube to 1/4 Male Pipe Swivel Push Connect Tee
• REPLACEMENT # FOR 14042
• 1-8 Stainless Steel Heavy Hex Nut / Grade 18.8 / Coarse (UNC)
• M10 X 1.5 X 20 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• 1/4 Tube to 1/4 Male Pipe Swivel Push Connect Tee
• 7/8 SET SCREW SHAFT COLLAR STAINLESS STEEL
• 1-14 X 3 1/4 Hex Cap Screw / Grade 5 / Fine (UNF) / Plain Finish
• M10 X 1.5 X 20 Metric Cap Screw / Class 10.9 / Zinc Plated / Full Thread / DIN #933
• 1/2 Tube to 3/8 Male Pipe Push Connect Tee Ends Tube Center
• 5/16X3/4 HEX WASHER THREAD CUTTING SCR TYP F
• 1/4 x 3/4 Stainless Steel Spiral (Coiled) Spring Pin Grade 420
• 3/8 Tube to 3/8 Male Pipe Push Connect Tee Ends Tube Center
• 1-8 X 3 1/4 Hex Cap Screw / Grade 5 / Coarse (UNC) / Plain Finish
• #8-32 X 5/16 Stainless Steel Socket Set Screw / Cup Point / Coarse (UNC) / Grade 18.8
• 3/8 Tube to 1/4 Male Pipe Push Connect Tee Ends Tube Center
• 1-12 X 3 1/2 Hex Cap Screw / Grade 8 / Fine (UNF) / Plain Finish
• 5/16-18X 3 ELEVATOR BOLT ZINC PLATED
• 1/4 Tube to 1/4 Male Pipe Push Connect Tee Ends Tube Center
• #8-32 X 3/16 Stainless Steel Socket Set Screw / Cup Point / Coarse (UNC) / Grade 18.8 18.8
• 1-14 X 3 1/2 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 5/16-18X2 1/2 ELEVATOR BOLT ZINC PLATED
• 1/2-13 Stainless Steel Heavy Hex Nut / Grade 18.8 / Coarse (UNC)
• #8-32 X 1 Stainless Steel Socket Set Screw / Coarse (UNC) / Grade 18.8
• 1/4 Tube to 1/8 Male Pipe Push Connect Tee Ends Tube Center
• 1-14 X 3 1/2 Hex Cap Screw / Grade 5 / Fine (UNF) / Zinc Plated
• 1/4 LCNCE PLT NUT
• #8-32 X 1/4 Stainless Steel Socket Set Screw / Cup Point / Coarse (UNC) / Grade 18.8
• 3/8 Tube to 1/4 Male Pipe Swivel Push Connect Tee Brass
• 1-14 X 3 1/2 Hex Cap Screw / Grade 5 / Fine (UNF) / Plain Finish
• 1/4-20X5/8 LIC PLATE SCREW W/NUT ZINC
• #8-32 X 1/2 Stainless Steel Socket Set Screw / Cup Point / Coarse (UNC) / Grade 18.8
• 1-8 X 3 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 3/8 Tube to 3/8 Male Pipe Ends Tube Push Connect Brass
• 3/8 Tube to 1/4 Male Pipe Push Connect Tee Center Tube
• 5/16-18X 1 1/2 ELEVATOR BOLT ZINC PLATED
• #8 Stainless Steel High Collar Lock Washer / Grade 18.8
• M10 X 1.5 X 16 Metric Cap Screw / Class 10.9 / Zinc Plated / Full Thread / DIN #933
• #6-32 X 5/16 Stainless Steel Socket Set Screw / Coarse (UNC) / Grade 18.8
• M10 X 1.5 X 16 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• 5/16 Stainless Steel High Collar Lock Washer / Grade 18.8
• 5/16-18 Extruded U Nut Panel Range : 0.025-0.060" Center of Hole to Edge : 9/16"
• #6-32 X 3/4 Stainless Steel Socket Set Screw / Cup Point / Coarse (UNC) / Grade 18.8
• 1-8 X 3 1/2 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 1/4 Tube to 1/8 Female Pipe Push Connect 90 Degree Elbow Brass
• 3/8 Stainless Steel High Collar Lock Washer / Grade 18.8
• 20MM HD DIA BMW HOOD/TRUNK INSUL RETAINER
• #6-32 X 3/16 Stainless Steel Socket Set Screw / Cup Point / Coarse (UNC) / Grade 18.8
• 1/2 Tube to 1/2 Male Pipe Swivel Push Connect 90 Degree Elbow
• 3/8-16X 3 ELEVATOR BOLT ZINC PLATED
• 1/4 Stainless Steel High Collar Lock Washer / Grade 18.8
• 8X1/2 CHROME
• 3/8-16X 2 1/2 ELEVATOR BOLT ZINC PLATED
• M10 X 1.5 X 150 Metric Cap Screw / Class 10.9 / Plain Finish / Partial Thread / DIN #931
• 9/16 SET SCREW SHAFT COLLAR ZINC PLATED"
• 1-14 X 2 Hex Cap Screw / Grade 5 / Fine (UNF) / Zinc Plated
• #6-32 X 1/4 Stainless Steel Socket Set Screw / Cup Point / Coarse (UNC) / Grade 18.8
• 3/8-16X 2 ELEVATOR BOLT ZINC PLATED
• M10 X 1.5 X 150 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• 3/8 Tube to 1/2 Male Pipe Swivel Push Connect 90 Degree Elbow
• 5/8X4 SHOULDER BOLT
• #6-32 X 1/2 Stainless Steel Socket Set Screw / Coarse (UNC) / Grade 18.8
• 1-14 X 2 Hex Cap Screw / Grade 5 / Fine (UNF) / Plain Finish
• 3/8 Tube to 3/8 Male Pipe Composite Swivel Push Connect 90 Degree Elbow
• 3/8-16X 1 1/2 ELEVATOR BOLT ZINC PLATED
• 1-8 X 2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 5/8X3 SHOULDER BOLT
• M10 X 1.5 X 140 Metric Cap Screw / Class 10.9 / Zinc Plated / Partial Thread / DIN #931
• 3/8 Tube to 1/4 Male Pipe Swivel Push Connect 90 Degree Elbow
• 5/16-24 X 3/8 Stainless Steel Socket Set Screw / Cup Point / Fine (UNF) / Grade 18.8
• 1/2 SET SCREW SHAFT COLLAR STAINLESS STEEL
• 1/4-20 X 3 ELEVATOR BOLT ZINC PLATED
• 1-8 X 2 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 5/8X1 3/4 SHOULDER BOLT
• 3/8 Tube to 1/8 Male Pipe Swivel Push Connect 90 Degree Elbow
• 1/4-20X 2 1/2 ELEVATOR BOLT ZINC PLATED
• 1-14 X 2 3/4 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• TRIM PANEL RETAINER
• 5/8X 1 1/4 SHOULDER BOLT (1/2-13 THREAD) PLAIN FINISH
• 1/4 Tube to 3/8 Male Pipe Composite Swivel Push Connect 90 Degree Elbow
• 5/16-18 X 3/4 Stainless Steel Socket Set Screw / Cup Point / Coarse (UNC) / Grade 18.8
• 1-14 X 2 3/4 Hex Cap Screw / Grade 5 / Fine (UNF) / Zinc Plated
• 1/4-20 x 2 Elevator Bolt Zinc Plated
• 5/8 X 1-1/2 SHOULDER BOLT
• 5/16-18 X 2-3/4 Stainless Steel Socket Set Screw / Coarse (UNC) / Grade 18.8
• 1/4-20X 1 1/4 ELEVATOR BOLT ZINC PLATED
• M10 X 1.5 X 130 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Partial Thread / DIN #931
• 1/4 Tube to 1/8 Male Pipe Swivel Push Connect 90 Degree Elbow Brass
• 5/16-18 X 1 Stainless Steel Socket Set Screw / Coarse (UNC) / Grade 18.8
• 1/4-20X 1 1/2 ELEVATOR BOLT ZINC PLATED
• 1-8 X 2 3/4 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• M 18 PUSH TYPE RETAINER
• 5/8 Tube to 1/2 Male Pipe Swivel Push Connect 90 Degree Elbow Brass
• 5/16-24 X 1/4 Stainless Steel Socket Set Screw / Cup Point / Fine (UNF) / Grade 18.8
• 3/8 Hose Barb Tee
• 5/8 Tube to 3/8 Male Pipe Swivel Push Connect 90 Degree Elbow Brass
• 5/16-18 X 1/4 Stainless Steel Socket Set Screw / Cup Point / Coarse (UNC) / Grade 18.8
• 5/16 X 1 (1/4-20) SOCKET SHOULDER BOLT BLACK OXIDE
• 1-14 X 2 1/4 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 1/2 Tube to 1/2 Male Pipe Push Connect 90 Degree Elbow Brass
• M10 X 1.5 X 120 Metric Cap Screw / Class 10.9 / Zinc Plated / Partial Thread / DIN #931
• 1/2 Tube to 3/8 Male Pipe Push Connect 90 Degree Elbow Brass
• 5/16-18 X 1 1/2 Stainless Steel Socket Set Screw / Coarse (UNC) / Grade 18.8
• 3/8 SET SCREW SHAFT COLLAR UNPLATED
• 3/8-16 x 3 Socket Shoulder Bolt Alloy Plain Finish
• 22-20 GA GM 280 SERIES TANGLESS OEM TERMINAL
• M10 X 1.5 X 120 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Partial Thread / DIN #931
• 1/2 Tube to 1/4 Male Pipe Push Connect 90 Degree Elbow Brass
• 1-14 X 2 1/4 Hex Cap Screw / Grade 5 / Fine (UNF) / Zinc Plated
• M6.3 x 1.81 x 20 Hex Washer Sems Screw Black Phosphate
• 3/8 SET SCREW SHAFT COLLAR STAINLESS STEEL
• 18-16 GA GM METRI 280 TANGLESS OEM TERMINAL
• 3/8 Tube to 1/2 Male Pipe Push Connect 90 Degree Elbow Brass
• 1/4X 2 DETENT PIN ZINC PLATED
• 1-14 X 2 1/4 Hex Cap Screw / Grade 5 / Fine (UNF) / Plain Finish
• GM M8-2.12 X 20 HEX WASHER BODY HEAD BOLT
• 3/8 Tube to 3/8 Male Pipe Push Connect 90 Degree Elbow Brass
• 16-14 GA GM METRA PACK 280 OEM TERMINAL
• 2X60 3M SILVER DUCT TAPE (9 MIL THK)"
• 3/8-24 X 3/8 Stainless Steel Socket Set Screw / Cup Point / Fine (UNF) / Grade 18.8
• 14-12 GA GM 280 SERIES TANGLESS OEM TERMINAL
• 3/8 Tube to 1/4 Male Pipe 90 Degree Elbow Brass
• 1-8 X 2 1/4 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• M8 X 30 BODY BOLT
• 3/4X 4 1/2 (5/8-11) SHOULDER BOLT PLAIN FINISH
• 22-20 GA. TERMINAL TIN PLATED
• 3/8 Tube to 1/8 Male Pipe Push Connect 90 Degree Elbow Brass
• M10 X 1.5 X 110 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Partial Thread / DIN #931
• 1-14 X 2 1/2 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 3/4X 3 SHOULDER BOLT (5/8-11 THREAD) PLAIN FINISH
• 3/8-16 X 3/4 Stainless Steel Socket Set Screw / Cup Point / Coarse (UNC) / Grade 18.8
• 18-16 GA. USED WITHOUT CABLE SEAL
• 5/16 SET SCREW SHAFT COLLAR BLACK OXIDE
• 3/4X 3 1/4 SHOULDER BOLT (5/8-11 THREAD) PLAIN FINISH
• GM METRI-PACK PULL TO SEAT 22-20 GA TIN PLAT
• 1/4 Tube to 3/8 Male Pipe Push Connect 90 Degree Elbow Brass
• M10 X 1.25 X 100 Metric Cap Screw / Class 10.9 / Plain Finish / Partial Thread / DIN #960
• M6X25 MET HEX SEM
• 3/8-16 X 1 Stainless Steel Socket Set Screw / Cup Point / Coarse (UNC) / Grade 18.8
• GM METRI-PACK PULL TO SEAT 18-16 GA TIN PLAT
• 1/4 Tube to 1/4 Male Pipe Push Connect 90 Degree Elbow Brass
• 1-8 X 2 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 22-20 GM 150 SERIES
• 1/4 Tube to 1/8 Male Pipe Push Connect 90 Degree Elbow Brass
• 3/4X 2 1/2 SHOULDER BOLT (5/8-11 THREAD) PLAIN FINISH
• M10 X 1.5 X 100 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Partial Thread / DIN #931
• 3/8-16 X 1/2 Stainless Steel Socket Set Screw / Cup Point / Coarse (UNC) / Grade 18.8
• 1-8 X 2 1/2 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 22-20 GAUGE TERM GM MICRO PACK 100W SERIES
• M10 X 1.5 X 100 Metric Cap Screw / Class 10.9 / Zinc Plated / Partial Thread / DIN #931
• 5/32 Tube to 1/8 Male Pipe Push Connect 90 Degree Elbow Brass
• M6 X 1.0 X 28 HEX HEAD SEMS BODY BOLT
• M10 X 1.5 X 100 Metric Hex Cap Screw / Class 8.8 / Zinc Plated / Full Thread / DIN #933
• 3/4 Tube to 3/4 Male Pipe Push Connect 90 Degree Elbow Brass
• 3/4X 1 1/2 SHOULDER BOLT (5/8-11 THREAD) PLAIN FINISH
• 3/4 Tube to 1/2 Male Pipe Push Connect 90 Degree Elbow Brass
• 5/8 Tube to 1/2 Male Pipe Push Connect 90 Degree Elbow Brass
• M7X 8 PUSH RETAINER CLIP (MERCEDES) BLK NYL
• 1X21/2 SHOULDER BOLT
• M5 x 45 Metric Cotter Pin Zinc Plated
• 1/2 Tube to 1/2 Male Pipe Push Connect Brass
• 1/4-28 X 3/16 Stainless Steel Socket Set Screw / Cup Point / Fine (UNF) / Grade 18.8
• 1/4-20 x 5/8 (#10-24 Thread) Shoulder Bolt Plain Finish Coarse
• 1/2 Tube to 1/4 Male Pipe Push Connect Brass
• 3/8 Tube to 1/2 Male Pipe Connector Brass
• 1/4-20 X 1/4 Stainless Steel Socket Set Screw / Coarse (UNC) / Grade 18.8
• Open Double Knurl Nut Brass
• 3/8 Tube to 3/8 Male Pipe Push Connector Brass
• 5/16 X 3/4 DOWEL PIN ALLOY STEEL
• 1/4-20 x 3/4 (#10-24 Thread) Shoulder Bolt Plain Finish Coarse
• 1/4-20 Extruded U Nut - (Sub 10050) Panel Range : 0.025-0.150" Center of Hole to Edge : 17/32" Phosphate
• 3/8 Tube to 1/4 Male Pipe Push Connector Brass
• 3/16 SET SCREW SHAFT COLLAR UNPLATED
• 3/4X1/2 Reducing Nipple Brass
• 10-12 U NUT
• 3/8 Tube to 1/8 Male Pipe Push Connect Brass
• 3/4 Hex Nipple Pipe Brass
• 1/4-20 x 1 (#10-24 Thread) Shoulder Bolt Plain Finish Coarse
• 3/16 SET SCREW SHAFT COLLAR STAINLESS STEEL
• 1/4-20 X 1 1/4 Stainless Steel Socket Set Screw / Coarse (UNC) / Grade 18.8
• 5/16 X 1/2 DOWEL PIN ALLOY STEEL
• 1/2X3/8 Reducing Nipple Brass
• 1/4-20 x 1/4 (#10-24 Thread) Shoulder Bolt Plain Finish Coarse
• 5/16X 1 1/4 DOWEL PIN ALLOY STEEL PLAIN FINISH
• 5/32 Tube to 1/16 Male Pipe Push Connect Brass
• 1/2 x 1/4 Reducing Nipple Brass
• 1/4-20 x 1/2 (#10-24 Thread) Shoulder Bolt Plain Finish Coarse
• 1/2 Hex Nipple Brass
• 1/4-20 x 1 1/4 (#10-24 Thread) Shoulder Bolt Plain Finish Coarse
• 1/4 Tube to 3/8 Male Pipe Push Connect Brass
• FORD MUD FLAP RETAINER BLACK NYLON
• 3/8 X 3/4 DOWEL PIN ALLOY STEEL
• 3/8X1/4 Reducing Nipple Brass
• 1/2X 3/8 SHOULDER BOLT (3/8-16 THREAD) PLAIN FINISH
• 1/4 Tube to 1/4 Male Pipe Push Connect Brass
• 1/2 X 3/4 SHOULDER BOLT C
• 1/4 Tube to 1/8 Male Pipe Push Connect Brass
• 1-8 X 1 3/4 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• M5 X .8 Metric Coupling Nut
• TRIM PANEL RETAINER BLACK NYLON
• 3/8 Hex Nipple Brass
• 1/2X2 SHOULDER BOLT C
• 3/8 X 1/2 DOWEL PIN ALLOY STEEL
• 1/4 x 1/8 Reducing Nipple Brass
• 5/32 Tube to 1/8 Male Pipe Push Connect Brass
• 1/2X1 SHOULDER BOLT C
• 3/4 Tube to 3/4 Male Pipe Push Connect Brass
• 1/4 Hex Nipple Brass
• 1-8 X 12 Hex Cap Screw / Grade 8 / Coarse (UNC) / Plain Finish
• 1/2X1 3/4 SHOULDER BOLT
• 3/4 Tube to 1/2 Male Pipe Push Connect Brass
• 2X1 1/2 SET SCREW SHAFT COLLAR ZINC PLATED
• 1-8 X 12 Hex Cap Screw / Grade 5 / Coarse (UNC) / Plain Finish
• 1/8 Hex Nipple Brass
• 3/8X 1 DOWEL PIN ALLOY STEEL PLAIN FINISH
• 5/8 Tube to 1/2 Male Pipe Push Connect Brass
• 5/8 Tube to 3/8 Male Pipe Push Connect Brass
• 5/16 X 1 Stainless Steel Spring Pin / Grade 18.8 / 420
• 3/16 X 3/4 DOWEL PIN ALLOY STEEL
• SPLIT-TYPE DIA:1/4,GRIP:3/16-3/8,FLNG:9/16
• 3/8 X 2 Stainless Steel Spring Pin / Grade 18.8 / 420
• 1-14 X 11 Hex Cap Screw / Grade 8 / Fine (UNF) / Plain Finish
• 1/4 Tube to 1/4 Female Pipe Push Connect Brass
• 3/16 X 1/2 DOWEL PIN ALLOY STEEL
• 1/4 Tube to 1/8 Female Pipe Push Connect Brass
• 3/16 X 3/4 Stainless Steel Spring Pin / Grade 18.8 / 420
• 1/8 X 3/4 Stainless Steel Spring Pin / Grade 18.8 / 420
• 1-8 X 11 Hex Cap Screw / Grade 8 / Coarse (UNC) / Plain Finish
• 1/4 Push Connect 90 Degree Tube to Tube Elbow
• 1 3/8 SET SCREW SHAFT COLLAR BLACK OXIDE
• 1/8 X 1 Stainless Steel Spring Pin / Grade 420
• 3/16X 1 DOWEL PIN ALLOY PLAIN FINISH
• 3/8 (.306) X 3 HEAVY OPEN S-HOOK ZINC PLATED
• 1/2 Composite Push Connect Union Dee DOT rated
• 1/4 X 2 1/4 Stainless Steel Spring Pin / Grade 18.8 / 420
• 1-14 X 1 1/2 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 1/2 Push Connect Union Tee
• 3/8 Composite Push Connect Union Tee DOT rated
• 1/4 X 1 Stainless Steel Spring Pin / Grade 18.8 / 420
• 1/8 INCH SET SCREW SHAFT COLLAR ZINC PLATED
• 1-8 X 1 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 3/8 Push Connect Union Tee
• #8X 3 STAINLESS STEEL PHILLIPS FLAT WOOD SCREW 18.8
• 1-8 X 1 1/2 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 1/4 Composite Push Connect Union Tee DOT rated
• 1/8SET SCREW SHAFT COLLAR BLACK/OXIDE
• 1-8 X 1 1/2 Hex Cap Screw / Grade 5 / Coarse (UNC) / Plain Finish
• 1/4 Push Connect Union Tee Brass
• 1/8 X 3/4 DOWEL PIN ALLOY STEEL PLAIN FINISH
• #8X 1 3/4 STAINLESS STEEL PHILLIPS FLAT WOOD SCREW 18.8
• 5/8 Push Connect Union Tee Brass
• 6 X 1 1/4 SET SCREW SHAFT COLLAR BLACK/OXIDE
• 1/2 COUPLING BRASS
• 1/2 Composite Push Connect Union Brass DOT rated
• 1/8X1 1/2 DOWEL PIN
• M5 Self Threading Nut 10mm Hex, 15mm Washer
• 1/2 Push Connect Union Brass
• #6X 1 1/4 STAINLESS STEEL PHILLIPS FLAT WOOD SCREW 18.8
• 1/8X 1 DOWEL PIN ALLOY STEEL PLAIN FINISH
• 3/8 Composite Push Connect Union Brass DOT rated
• 3/8 Push Connect Union Brass
• #8-36 X 5/16 Socket Set Screw / Cup Point / Fine (UNF) / Plain Finish
• 1-8 X 10 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• #8-32 X 5/16 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• 1/4X21/2 PHILLIPS FLAT WOOD SCREW STAINLESS STEEL 18.8
• TOY DR TRIM PUSH RET HEAD 20MM STEM 8, 7 HOLE
• 5/32 Composite Push Connect Union Brass DOT rated
• M5X20 SEM TCS
• 1 SET SCREW SHAFT COLLAR (UNPLATED)
• 5/32 Push Connect Union Brass
• 8-18X1 1/2 R TS P
• #8-32 X 3/8 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• 1/4 Composite Push Connect Union Brass DOT rated
• #8X1 1/4 FWTS P B
• 3/4 COUPLING BRASS
• 1/4 Push Connect Union Brass
• #8 x 1 Phillips Flat Washer Trim Screw Black
• #8-32 X 3/4 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• #8X 3/4 PHILL FLAT WASHER TRIM SCREW BLACK
• #8-36 X 3/16 Socket Set Screw / Cup Point / Fine (UNF) / Plain Finish
• PHL PN WSH TP BLK
• #8-32 X 3/16 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• 5/8X 1 1/4 RIGID SOLID SET SCREW SHAFT COUPLING
• #8-32 X 1 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• 1/8 Tube to 1/8 Male Push Connector Brass
• 1 5/8-5 1/2 X 5 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Plain Finish
• 3/8 x 31/32 Black Rubber Vacuum Cap Fit 3/8" tube O.D.
• 7/8-9 X 4 1/2 #3 Flathead Plow Bolt / Grade 5 / Coarse (UNC) / Plain Finish
• 1/8 X 9/16 RUBBER BLACK VACUUM CAPS FITS 1/8 TUBE O.D.
• 1/2X 1 RIGID SOLID SET SCREW SHAFT COUPLING"
• 1/4-20 X 7 Hex Cap Screw / Grade 8 / Coarse (UNC) / Plain Finish
• #8-36 X 1/4 Socket Set Screw / Cup Point / Fine (UNF) / Plain Finish
• #8 X 1 1/4 Stainless Steel Phillips Flat Tapping Screw / Grade 18.8.
• 1/2X2 DOWEL PIN
• 40 AMP MCASE FUSE GREEN
• #8 X 1 1/2 Stainless Steel Phillips Flat Tapping Screw / Grade 18.8.
• #8-32 X 1/4 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• 7/8-9 X 3 1/2 #3 #3 Dome Head Plow/Scraper Blade Bolt / Grade 8 / Coarse (UNC) / Plain Finish
• 1/4-20 X 7/8 Hex Cap Screw / Grade 8 / Coarse (UNC) / Plain Finish
• 30 AMP MCASE FUSE PINK
• 1/4-20 X 7/8 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 25 AMP MCASE FUSE TAN
• 7/8-9 X 3 #3 Dome Head Plow/Scraper Blade Bolt / Grade 8 / Coarse (UNC) / Plain Finish
• 1/2 Teflon Tape / Brass
• 20 AMP MCASE FUSE BLUE
• WEATHERSTRIP RET
• 1" Teflon Tape / Thread Sealant
• 1/4-20 X 7 1/2 Hex Cap Screw / Grade 5 / Coarse (UNC) / Plain Finish
• 7/8-9 X 2 3/4 #3 Dome Head Plow/Scraper Blade Bolt / Grade 8 / Coarse (UNC) / Plain Finish
• #8-32 X 1/2 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• 1/4-28 X 6 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 1" Hex Plug Brass
• REPLACEMENT PART # FOR 12758 10PCS ASST
• 3/4 Hex Plug Brass
• 7/8-9 X 2 1/2 #3 Flathead Plow Bolt / Grade 5 / Coarse (UNC) / Plain Finish
• #6 X 1 Stainless Steel Phillips Flat Tapping Screw / Grade 18.8
• 1/4-20 X 6 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 1/2 Hex Plug Brass
• 7/16-14 X 3 #3 Flathead Plow Bolt / Grade 5 / Coarse (UNC) / Plain Finish
• 1/4-20 X 6 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 3/8 Hex Plug Brass
• 7/16-14 X 2 1/2 #3 Flathead Plow Bolt / Grade 5 / Coarse (UNC) / Plain Finish
• 1/4 Hex Plug Brass
• 1/4-28 X 5 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• E-NET PROMO DISCOUNT COUPON
• 1/8 Hex Plug Brass
• 9/16-18 Hex Die / Fine (UNF) / Type 405
• GM WIRING HARNESS & HEADLINER RETAINER
• 5/16 SCREW PIN ANCHOR SHACKLE GALVANIZED
• 1/4-20 X 5 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 5/8-11 THD SINGLE SPLIT STEEL SHAFT COLLAR BLACK OXIDE
• M18 X 1.5 Metric Castle Nut / Zinc Plated / DIN #935
• 8-32 Hex Die / Coarse (UNC) / Type 405
• 1/4-20 X 5 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 3/4-16 SINGLE SPLIT STEEL SHAFT COLLAR BLACK OXIDE
• M16 X 1.5 Metric Castle Nut / Plain Finish / DIN #935
• 7/16-14 X 1 1/4 #3 Flathead Plow Bolt / Grade 5 / Coarse (UNC) / Zinc Plated
• 1/4-28 X 5/8 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 7/16-14 X 1 1/2 Carriage/Plow/Shaker Screen Bolt / Grade 5 / Coarse (UNC) / Full Thread / Plain Finish
• 1-8 SINGLE SPLIT SHAFT COLLAR BLACK OXIDE"
• 7/16-14 X 1 1/2 #3 Flathead Plow Bolt / Grade 5 / Coarse (UNC) / Plain Finish
• 7/16-20 Hex Die / Fine (UNF) / Type 405
• M12 X 1.25 Metric Castle Nut / Zinc Plated / DIN #935
• 1/4 X 2 Stainless Steel Phillips Flat Tek Screw / Grade 410
• 5/8-11 X 9 Carriage/Plow/Shaker Screen Bolt / Grade 5 / Coarse (UNC) / Partial Thread / Zinc Plated
• M6X1X22 BODY BOLT
• 7/16-14 Hex Die / Coarse (UNC) / Type 405
• 1/4-20 X 5/8 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 6-32 Hex Die / Coarse (UNC) / Type 405
• 5/8-11 X 9 Carriage/Plow/Shaker Screen Bolt / Grade 5 / Coarse (UNC) / Partial Thread / Plain Finish
• RED FEM. DISC 187
• THREADED SINGLE SPLIT STEEL SHAFT COLLAR
• 1/4-28 X 5 1/2 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 5/8-11 X 8 Plow/Shaker Screen Bolt / Grade 8 / Coarse (UNC) / Partial Thread / Plain Finish
• M10 X 1.25 Metric Castle Nut / Zinc Plated / DIN #935
• 5/16-24 Hex Die / Fine (UNF) / Type 405
• 5/8-11 X 7 Carriage/Plow/Shaker Screen Bolt / Grade 5 / Coarse (UNC) / Partial Thread / Zinc Plated
• 1/4-20 X 5 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 5/16-18 Hex Die / Coarse (UNC) / Type 405
• 7/16-14 X 3/8 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• M8X19 (15MM HD) WHEEL MOULDING PUSH RETAINER
• 1/4-20 X 5 1/2 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• MULTI-CUTTER
• 3/4 COUPLING BRASS
• 3/8 NPT Hex Die #415
• 7/16-14 X 3/4 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• 1/4-28 X 4 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 3/8-24 Hex Die / Fine (UNF) / Type 405
• 5/8-11 X 6 #3 Dome Head Plow/Scraper Blade Bolt / Grade 8 / Coarse (UNC) / Plain Finish
• M8 X 1.25 X 70 Metric Button Socket Cap Screw / Class 12.9 / Plain Finish / Full Thread / DIN #801
• 3/8 MALE/FEMALE WATER HOSE COUPLING
• 1/4-20 X 4 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 7/16-14 X 1 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• 3/8-16 Hex Die / Coarse (UNC) / Type 405
• M8 X 1.25 X 40 Metric Button Socket Cap Screw / Class 12.9 / Plain Finish / Full Thread / DIN #801
• 1/4-20 X 4 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 1/4 MALE HOSE COUPLING
• 7/16 X 1/2 Socket Set Screw / Cup Point / Fine (UNF) / Plain Finish
• 11/16-20 DRAIN PLUG SELF-TAP/FIBRE GASKET
• GM Radiator Apron Panel Retainer 1977-on. Black Nylon 7/16 stem, 13/16 length
• M8 X 1.25 X 20 Metric Button Socket Cap Screw / Class 10.9 / Zinc Plated / Full Thread / DIN #801
• 5/8-11 X 6 Plow/Shaker Screen Bolt / Grade 8 / Coarse (UNC) / Full Thread / Plain Finish
• 1/4-20 X 4 1/4 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 7/16-14 X 1/2 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• 5/8-11 X 6 Carriage/Plow/Shaker Screen Bolt / Grade 5 / Coarse (UNC) / Full Thread / Plain Finish
• 1/4-28 X 4 1/2 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• TOYOTA DOOR MOULDING CLIP 15MM HEAD NYLON
• 7/16-14 X 1 1/4 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• 3/8 MANIFLD STUD
• 9/16 OIL PLUG GAS
• M12 PUSH NUT
• M6 X 1.0 X 25 Metric Button Socket Cap Screw / Class 10.9 / Plain Finish / Full Thread / DIN #801
• 3/4 OIL DRN GASKT
• 1/4-20 X 4 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• M6 X 1.0 X 20 Metric Button Socket Cap Screw / Class 10.9 / Plain Finish / Full Thread / DIN #801
• 5/8 NYL DRAIN GASKET
• 1/4-20 X 4 1/2 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• M8X1.25 PUSH NUT BOLT RETAINERS
• 1/2 Nylon Gasket .520 ID .750 OD .094 thick - Natural
• 1/4-28 X 3 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 5/8-11 X 5 1/2 Carriage/Plow/Shaker Screen Bolt / Grade 5 / Coarse (UNC) / Full Thread / Zinc Plated
• M6 X 1.0 X 16 Metric Button Socket Cap Screw / Class 10.9 / Plain Finish / Full Thread / DIN #801
• 1/4-28 X 3 Hex Cap Screw / Grade 5 / Fine (UNF) / Zinc Plated
• 5/8-11 X 5 1/2 Carriage/Plow/Shaker Screen Bolt / Grade 5 / Coarse (UNC) / Full Thread / Plain Finish
• 1/4 X 18 Hex Die #415
• 1/2x 3 ADJUSTABLE /UNIVERSAL CLEVIS PIN ZINC
• M6 X 1.0 X 12 Metric Button Socket Cap Screw / Class 10.9 / Zinc Plated / Full Thread / DIN #801
• 1/4-20 X 3 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• #8X11/4 R TEK SCR
• 5/8-11 X 5 #3 Dome Head Plow/Scraper Blade Bolt / Grade 8 / Coarse (UNC) / Plain Finish
• 1/4-28 Hex Die / Fine (UNF) / Type 405
• 1/4-20 X 3 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• M6.3X1.81X16 DUE DRIVE L.P SCREW 14MM HEAD
• 5/8-11 X 5 Carriage/Plow/Shaker Screen Bolt / Grade 5 / Coarse (UNC) / Full Thread / Zinc Plated
• 1/4-20 Hex Die / Coarse (UNC) / Type 405
• 5/8-11 X 5 Plow/Shaker Screen Bolt / Grade 8 / Coarse (UNC) / Full Thread / Plain Finish
• M16 X 2.0 X 30 Metric Button Socket Cap Screw / Class 10.9 / Zinc Plated / Full Thread / DIN #801
• 1/4-28 X 3/4 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 1 3/8 BLACK NYLON LOCKING HOLE PLUG
• 5/8-11 X 5 Carriage / Plow / Shaker Screen Bolt / Grade 5 / Coarse (UNC) / Full Thread / Plain Finish
• #6-32 X 5/16 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• BLACK NYLON HOLE PLUGS
• BLACK NYLON HOLE PLUG
• 1/4-20X 1 1/2 STAINLESS STEEL PHILLIPS FLAT THREAD CUTTING SCREW TYPE F 18.8
• M10 X 1.5 X 40 Metric Button Socket Cap Screw / Class 10.9 / Zinc Plated / Full Thread / DIN #801
• 1/2-20 Hex Die / Fine (UNF) / Type 405
• 1/4-20 X 3/4 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• BLACK NYLON HOLE PLUG
• 1/2-13 Hex Die / Coarse (UNC) / Type 405
• 1/4-20 X 3/4 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• #6-32 X 3/4 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• 5/8-11 X 4 1/2 #3 #3 Dome Head Plow/Scraper Blade Bolt / Grade 8 / Coarse (UNC) / Plain Finish
• #6-40 X 3/16 Socket Set Screw / Cup Point / Fine (UNF) / Plain Finish
• Toyota Fender Liner Screw M5.5 x 18 16mm Head Diameter Black
• 3/4 Female Pipe to 1/2 Male Pipe Adapter Brass
• #8-32 X 3/4 Stainless Steel Flat Socket Cap Screw / Grade 18.8 / Coarse (UNC)
• 5/8-11 X 4 1/2 Carriage/Plow/Shaker Screen Bolt / Grade 5 / Coarse (UNC) / Full Thread / Zinc Plated
• #8-32 X 1 Stainless Steel Flat Socket Cap Screw / Grade 18.8 / Coarse (UNC)
• 5/8-11 X 4 1/2 Plow/Shaker Screen Bolt / Grade 8 / Coarse (UNC) / Full Thread / Plain Finish
• #6-32 X 3/16 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• 1/4D X .080-.375 GRIP STL/STL MONO BOLT RIVET
• 10 Hex Die / Coarse (UNC)
• 1/2 Female Pipe to 1/2 Male Pipe Adapter Brass
• #8-32 X 1/2 Stainless Steel Flat Socket Cap Screw / Grade 18.8 / Coarse (UNC)
• 5/8-11 X 4 1/2 Carriage/Plow/Shaker Screen Bolt / Grade 5 / Coarse (UNC) / Full Thread / Plain Finish
• 1/2X3/8 Adapter Brass
• 5/8-11 X 4 #3 Dome Head Plow/Scraper Blade Bolt / Grade 8 / Coarse (UNC) / Plain Finish
• 3/16D 1/4G STEEL/STEEL MONO BOLT
• 1/2 x 1/4 Adapter Brass
• #6-32 X 1/2 Stainless Steel Flat Socket Cap Screw / Grade 18.8 / Coarse (UNC)
• 5/8-11 X 4 Carriage/Plow/Shaker Screen Bolt / Grade 5 / Coarse (UNC) / Full Thread / Zinc Plated
• 1/4-20 X 3 3/4 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 1/4DX .080-.375G Aluminum/Aluminum Mono Bolt Rivet
• 5/8 Drop In Anchor Zinc Plated
• 3/8 Female Pipe to 3/8 Male Pipe Adapter Brass
• 5/8-11 X 2 1/2 Stainless Steel Flat Socket Cap Screw / Grade 18.8 / Coarse (UNC)
• 1/4D X 5/8G Aluminum/Aluminum Mono Bolt Rivet
• 5/8-11 X 4 Plow/Shaker Screen Bolt / Grade 8 / Coarse (UNC) / Full Thread / Plain Finish
• 3/8X1/4 Adapter Brass
• 1/4-28 X 3 1/4 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 5/8-11 X 4 Carriage/Plow/Shaker Screen Bolt / Grade 5 / Coarse (UNC) / Full Thread / Plain Finish
• 3/4 Drop In Anchor Zinc Plated
• 3/8 Female Pipe to 1/8 Male Pipe Adapter Brass
• 16MM HEAD TRUNK RETAINER (HONDA)
• 16GA 10AMP ATM MINI FUSE HOLDER W/CAP&10 WIR"
• #6-32 X 1/4 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• 1/4 Drop In Anchor Zinc Plated
• 1/4 Female Pipe to 1/4 Male Pipe Adapter Brass
• 5/16-18 X 5/8 Stainless Steel Flat Socket Cap Screw / Grade 18.8 / Coarse (UNC)
• LOW PROFILE MINI BLADE FUSE CONVERTICAL (ADD A CIRT
• 1/4-20 X 3 1/4 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 1/4 Female Pipe to 1/8 Male Pipe Adapter Brass
• Mini Blade Fuse Converter / 10 Amp / Add Circuit
• 1/4-20 X 3 1/4 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• #6-32 X 1/2 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• 1/8 Female Pipe to 1/8 Male Pipe Adapter Brass
• 5/16-18 X 3/4 Stainless Steel Flat Socket Cap Screw / Grade 18.8 / Coarse (UNC)
• 7 1/2 Amp Low Profile Mini Blade Fuse
• 1/4-28 X 3 1/2 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 71/2 Amp Mini Blade Fuse
• 5/8-18 X 5/8 Socket Set Screw / Cup Point / Fine (UNF) / Plain Finish
• 5/8-11 X 3 1/2 #3 Dome Head Plow/Scraper Blade Bolt / Grade 8 / Coarse (UNC) / Plain Finish
• 20MM PUSH TYPE RETAINER
• 5 Amp Low Profile Mini Blade Fuse
• 1/4-20 X 3 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 5/8-11 X 5/8 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• 5/8-11 X 3 1/2 Carriage/Plow/Shaker Screen Bolt / Grade 5 / Coarse (UNC) / Full Thread / Zinc Plated
• M4.2X1.41X 20 PHILL PAN SEMS POZI DRIVE SCREW
• 5/16-18 X 1 Stainless Steel Flat Socket Cap Screw / Grade 18.8 / Coarse (UNC)
• 5 Amp Mini Blade Fuse
• 1/4-20 X 3 1/2 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 5/8-11 X 3 1/2 Plow/Shaker Screen Bolt / Grade 8 / Coarse (UNC) / Full Thread / Plain Finish
• Crimping Tool for Deutsch Solid Connectors
• 5/16-24 X 1/2 Stainless Steel Flat Socket Cap Screw / Grade 18.8 / Fine (UNF)
• #8X 1/2 PHILL OVAL WASHER TEK SCREW CHROME
• 5/8-11 X 3 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• 4 Amp Mini Blade Fuse
• 5/16-18 X 1 1/4 Stainless Steel Flat Socket Cap Screw / Grade 18.8 / Coarse (UNC)
• 5/8-11 X 3 1/2 Carriage/Plow/Shaker Screen Bolt / Grade 5 / Coarse (UNC) / Full Thread / Plain Finish
• 14MM DOUBLE SPLIT STEEL SHAFT COLLAR BLK/OX
• NISSAN TRIM PANEL TOP 13MM BOT 17 WHITE NYL
• 3/16 DIA 3/8GRIP ALUM/ALUM MONOBOLT
• 3 Amp Mini Blade Fuse
• 1/4-28 X 2 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 5/16-18 X 1 1/2 Stainless Steel Flat Socket Cap Screw / Grade 18.8 / Coarse (UNC)
• 5/8-11 X 3 1/2 #3 Flathead Plow Bolt / Grade 5 / Coarse (UNC) / Zinc Plated
• 30 Amp Low Profile Mini Blade Fuse
• #Y Drill Bit 190 AG
• 5/8-11 X 3 #3 Dome Head Plow/Scraper Blade Bolt / Grade 8 / Coarse (UNC) / Plain Finish
• 13MM DOUBLE SPLIT STEEL SHAFT COLLAR BLK/OX
• HOOD INSULATION RETAINER 1998 - ON
• 30 Amp Mini Blade Fuse
• X DRILL BIT TYPE 190AG
• 5/8-11 X 3 Carriage/Plow/Shaker Screen Bolt / Grade 5 / Coarse (UNC) / Full Thread / Zinc Plated
• 2 Amp Mini Blade Fuse
• 1/4-20 X 2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 1/4 LICENSE PLATE NUT (CHRYSLER)
• 3/16X 1/4 GRIP STEEL MONOBOLT ZINC
• W Drill Bit 190AG
• 5/8-11 X 3 Plow/Shaker Screen Bolt / Grade 8 / Coarse (UNC) / Full Thread / Plain Finish
• 3/8-16 X 3/4 Stainless Steel Flat Socket Cap Screw / Grade 18.8 / Coarse (UNC)
• 25 Amp Low Profile Mini Blade Fuse
• Toyota Screw Grommet #12 Screw Fender Lining
• 5/8-11 X 1 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• 1/4-20 X 2 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 5/8-11 X 3 Carriage/Plow/Shaker Screen Bolt / Grade 5 / Coarse (UNC) / Full Thread / Plain Finish
• 25 Amp Mini Blade Fuse
• LETTER V Drill Bit Type 190-AG
• 3/4 COUPLING BRASS
• 20 Amp Low Profile Mini Blade Fuse
• 1/4-28 X 2 3/4 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 5/8-11 X 1 1/4 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• SWITCH
• 5/8-11 X 3 #3 Flathead Plow Bolt / Grade 5 / Coarse (UNC) / Plain Finish
• #U Drill Bit 190-AQF
• 20 Amp Mini Blade Fuse
• 5/8-11 X 2 3/4 #3 Dome Head Plow/Scraper Blade Bolt / Grade 8 / Coarse (UNC) / Plain Finish
• 5/8 Taper Shank Drill Bit High Speed Steel
• 15 Amp Low Profile Mini Blade Fuse
• 1/4-20 X 2 3/4 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 3/8 MALE/MALE WATER HOSE COUPLING
• 5/8-11 X 1 1/2 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• 3/4 Taper Shank Drill Bit High Speed Steel
• 3/8-16 X 1 Stainless Steel Flat Socket Cap Screw / Grade 18.8 / Coarse (UNC)
• 15 Amp Mini Blade Fuse
• 1/4-20 X 2 3/4 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 10 Amp Low Profile Mini Blade Fuse
• 3/8-16 X 1-3/4 Stainless Steel Flat Socket Cap Screw / Grade 18.8 / Coarse (UNC)
• 1/4-28 X 2 1/4 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 1/2 Taper Shank Drill Bit High Speed Steel
• M6-1.0 X 25 Hex Head Sems Screw Washer 24mm Phosphate
• 10 Amp Mini Blade Fuse
• 3/8-16 X 1 1/4 Stainless Steel Flat Socket Cap Screw / Grade 18.8 / Coarse (UNC)
• M6-1.0 x 25mm Hex Head Sems Screw 17mm OD - Phosphate Class 9.8
• 1/4-20 X 2 1/4 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• #T DRIL BIT 190AG
• 5/8-11 X 2 1/4 #3 Dome Head Plow/Scraper Blade Bolt / Grade 8 / Coarse (UNC) / Plain Finish
• 1/4-20 X 2 1/4 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 5/8-11 X 2 1/4 #3 Flathead Plow Bolt / Grade 5 / Coarse (UNC) / Plain Finish
• #8 x 3/4 Phillips Oval Washer Trim Screw Screw Size : M4.2-1.41 Length : 20mm Black
• 1/4-28 X 2 1/2 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 80 Amp Maxi Fuse
• 70 Amp Maxi Fuse
• 29 Piece Drill Bit Set (3 Flats) 190AQF in Plastic Ultra Dex
• 8125-C BRASS
• M6.3 x 1.81 x 20 Hex Sems Screw 17mm OD
• 5/8-11 X 2 1/2 #3 Dome Head Plow/Scraper Blade Bolt / Grade 8 / Coarse (UNC) / Plain Finish
• 60 Amp Maxi Fuse
• 1/4-20 X 2 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 5/8-11 X 2 1/2 Carriage/Plow/Shaker Screen Bolt / Grade 5 / Coarse (UNC) / Full Thread / Zinc Plated
• 8125-B BRASS
• 50 Amp Maxi Fuse
• 1/4-20 X 2 1/2 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 1/4-28 BALL JOINT
• 29 Piece Drill Bit Set (3 Flats) 190 AQF in metal box
• 5/8-11 X 2 1/2 Plow/Shaker Screen Bolt / Grade 8 / Coarse (UNC) / Full Thread / Plain Finish
• 40 Amp Maxi Fuse
• 1/4-28 X 1 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 1/4-20 X 3/4 Stainless Steel Flat Socket Cap Screw / Grade 18.8 / Coarse (UNC)
• 5/8-11 X 2 1/2 Carriage/Plow/Shaker Screen Bolt / Grade 5 / Coarse (UNC) / Full Thread / Plain Finish PL
• 30 Amp Maxi Fuse
• 20 Amp Maxi Fuse
• 1/4-20X 1 BRASS HEX CAP SCREW
• 5/8-11 X 2 #3 Dome Head Plow/Scraper Blade Bolt / Grade 8 / Coarse (UNC) / Plain Finish
• M6-1.0 Metric Acorn Nut Zinc Plated Din 1587
• 1/4-20 X 1 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 5/8-11 X 2 Carriage/Plow/Shaker Screen Bolt / Grade 5 / Coarse (UNC) / Full Thread / Zinc Plated
• 1/4-20 X 1 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 1/4-20 X 1/2 Stainless Steel Flat Socket Cap Screw / Grade 18.8 / Coarse (UNC)
• 5/8-11 X 2 Plow/Shaker Screen Bolt / Grade 8 / Coarse (UNC) / Full Thread / Plain Finish
• 1/4-20 X 1 HEX CAP SCREW GRADE 2 USS ZINC PLATED
• 1/4-20 X 1 1/4 Stainless Steel Flat Socket Cap Screw / Grade 18.8 / Coarse (UNC)
• 5/8-11 X 2 Carriage/Plow/Shaker Screen Bolt / Grade 5 / Coarse (UNC) / Full Thread / Plain Finish
• 5/16-18 X 7/8 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• 2 BLACK PIPE 45 DEGREE ELBOW"
• 1/4-20 X 1 1/2 Stainless Steel Flat Socket Cap Screw / Grade 18.8 / Coarse (UNC)
• 5/8-11 X 2 #3 Flathead Plow Bolt / Grade 5 / Coarse (UNC) / Plain Finish
• 5/16-18 X 7/16 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• 1/2-13 X 2 Stainless Steel Flat Socket Cap Screw / Grade 18.8 / Coarse (UNC)
• GM Push Retainer Radiator Wheelhouse Head Diameter : 17mm Stem Length : 16mm Hole Size : 6mm Black
• 9/16-1 DRILL BIT SET 130AG 4 PCS S&D-4SP
• 1/2-13 X 2 1/2 Stainless Steel Flat Socket Cap Screw / Grade 18.8 / Coarse (UNC)
• 5/8-11 X 13/4 #3 Flathead Plow Bolt / Grade 5 / Coarse (UNC) / Plain Finish
• 3/4 BLACK PIPE 45 DEGREE ELBOW
• M11 X25MM O.D DRAIN PLUG RUBBER GASKET
• 1/4-20 X 1 3/4 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 3 Pieces Step Drill Bit Set 3 Flats Type 78-AG
• 5/8-11 X 1 1/4 #3 Flathead Plow Bolt / Grade 5 / Coarse (UNC) / Plain Finish
• DOOR TRIM PANEL RETAINER
• 1/2 BLACK PIPE 45 DEGREE ELBOW
• 1/4-20 X 1 3/4 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 1/8 LEVER HANDLE BRASS
• 1/4-20X 1 3/4 HEX CAP SCREW GRADE 2 ZINC PLATED
• 3/8 BLACK PIPE 45 DEGREE ELBOW
• 5/16-24 X 5/16 SOCKET SET SCREW CUP PNT PLAIN FINISH 18.8
• 1/4-28 X 1/2 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 1 BLACK STEEL 45D STREET ELBOW"
• 5/16X1 1/2 BOLT
• Aluminum Oil Drain Plug Gasket 14mm ID, 20mm OD 1mm thick
• 3/4 x 1/2 Reducing Coupling Cast Bronze
• 1/4-20 X 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 1/2 BLACK PIPE 45 DEGREE STREET ELBOW
• M14-1.40 OVERSIZE OIL PAN DRAIN PLUG W/GASKET
• 3/8-16 X 3 1/2 #3 Flathead Plow Bolt / Grade 5 / Coarse (UNC) / Plain Finish
• 3/4 x 3/8 Reducing Coupling Cast Bronze
• 3/8 BLACK STEEL 45D STREET ELBOW
• 1/4-20 X 1/2 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 5/16-18 X 5/16 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• 1/4-20 X 1 1/8 Hex Cap Screw / Grade 8 / Coarse (UNC) / Plain Finish
• 2X 1 1/2 BLACK PIPE REDUCING COUPLING"
• 5/16-18 X 3 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• 18 Piece Tap & Drill Bit Set Fractional
• 1/4-28 X 1 1/4 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 1 1/2X 1 1/4 BLACK PIPE REDUCING COUPLING
• 5/16-24 X 3/8 Socket Set Screw / Cup Point / Fine (UNF) / Plain Finish
• 1/2 x 3/8 Reducing Coupling Brass
• 3/8-16 X 1 1/4 #3 Flathead Plow Bolt / Grade 5 / Coarse (UNC) / Zinc Plated
• GM REAR BUMPER RETAIN 20MM HEAD FITS 9MM HOLE
• 1/2 x 1/4 Reducing Coupling Brass
• 1/4-20 X 1 1/4 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 1 1/4X 3/4 BLACK PIPE REDUCING COUPLING
• FORD FRONT BUMPER COVER RETAINER 16 MM HEAD
• 3/8-16 X 1 #3 Flathead Plow Bolt / Grade 5 / Coarse (UNC) / Plain Finish
• 5/16-18 X 3/8 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• 1/4-20 X 1 1/4 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 1 X 3/4 BLACK PIPE REDUCING COUPLING
• 3/4-10 X 9 Carriage/Plow/Shaker Screen Bolt / Grade 5 / Coarse (UNC) / Partial Thread / Plain Finish
• M18 COPPER WASHER
• 3/8 x 1/4 Reducing Coupling Brass
• 1 X 1/2 BLACK PIPE REDUCING COUPLING
• #8-32 X 3/8 Stainless Steel Phillips Flat Machine Screw / Grade 18.8
• 3/4-10 X 8 Plow/Shaker Screen Bolt / Grade 8 / Coarse (UNC) / Partial Thread / Plain Finish
• 3/8 x 1/8 Reducing Coupling Brass
• 29 PCS DRILL BIT INDEX BOX BLACK (EMPTY)
• #8-32 X 3/4 Stainless Steel Phillips Flat Machine Screw / Grade 18.8
• 3/4 X 1/2 BLACK PIPE REDUCING COUPLING
• BK.FIBRE.OIL DRAIN PLUG CRUSHABLE GASKET
• 1/4 x 1/8 Reducing Coupling Brass
• 5/16-18 X 3/4 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• 1/4-28 X 1 1/2 Hex Cap Screw / Grade 8 / Fine (UNF) / Yellow Zinc Plated
• 3/4 X 3/8 BLACK PIPE REDUCING COUPLING
• 5/16-24 X 2 Socket Set Screw / Cup Point / Fine (UNF) / Plain Finish
• 1/2 X 3/8 BLACK PIPE REDUCING COUPLING
• M12 OIL GASKET
• 29 Piece Cobalt Drill Bit Set Type 150 - 1/16" to 1/2" in 1/64 increments, Metal Case
• #8-32 X 1 Stainless Steel Phillips Flat Machine Screw / Grade 18.8
• M10X1.5X 50 METRIC MANIFOLD STUD
• 1/4-20 X 1 1/2 Hex Cap Screw / Grade 8 / Coarse (UNC) / Yellow Zinc Plated
• 3/8 X 1/4 BLACK PIPE REDUCING COUPLING
• #8-32 X 1/4 Stainless Steel Phillips Flat Machine Screw / Grade 18.8
• 3/4-10 X 6 Carriage/Plow/Shaker Screen Bolt / Grade 5 / Coarse (UNC) / Full Thread / Zinc Plated
• 1/4-20 X 1 1/2 Hex Cap Screw / Grade 5 / Coarse (UNC) / Zinc Plated
• 3/8-1/8 BLACK PIPE REDUCING COUPLING
• 10-1.5 x 35 by 10-1.5 x 12 Overall 47mm Metric Manifold Stud Class 8 Alloy Steel Din 939
• #8-32 X 1 3/4 Stainless Steel Phillips Flat Machine Screw / Grade 18.8
• 20mm Oil Drain Plug Gasket Copper Inner Dia : 19.8mm Outer Dia : 26mm Thickness : 1.5mm
• 5/16-24 X 1 Socket Set Screw / Cup Point / Fine (UNF) / Plain Finish
• 1-1/4 90D STREET ELBOW
• M10X42 MTRC STUD
• 5/16-18 X 1 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• 14MM OIL DRAIN GASKET
• S Drill Bit 190AG
• 1 90D ST ELBOW
• 8 Piece Square Style Bolt Remover Set Type 421AG
• M12 OIL DRAIN PLUG GASKET
• 5/16-24 X 1/4 Socket Set Screw / Cup Point / Fine (UNF) / Plain Finish
• 3/4 BLACK PIPE 90 DEGREE ST ELBOW
• 3/4-10 X 5 #3 Dome Head Plow/Scraper Blade Bolt / Grade 8 / Coarse (UNC) / Plain Finish
• 8M METRIC STUD
• #8-32 X 1 1/4 Stainless Steel Phillips Flat Machine Screw / Grade 18.8
• 10PC BOLT REMOVER SET TYPE 420 BR-10
• 1/2 ALUMINUM OIL DRIAN PLUG GASKET
• 1/2 Black Pipe 90 Degree Street Elbow
• 3/4-10 X 5 Carriage/Plow/Shaker Screen Bolt / Grade 5 / Coarse (UNC) / Full Thread / Zinc Plated
• #8-32 X 1 1/2 Stainless Steel Phillips Flat Machine Screw / Grade 18.8
• 3/8 BLACK PIPE 90D STREET ELBOW
• M12X1.5X 12MM OIL DRIAN PLUG ZINC (BMW)
• 5/16-18 X 1/4 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• 3/4-10 X 5 Plow/Shaker Screen Bolt / Grade 8 / Coarse (UNC) / Full Thread / Plain Finish
• Metric Manifold Stuf M8-1.25 x 20 to M8-1.25 x 10mm Overall Length 40mm Class 8 Steel
• M12X1.25 OIL DRIAN PLUG
• 1/4 Black Pipe 90 Degree Street Elbow
• 3/4-10 X 5 Carriage/Plow/Shaker Screen Bolt / Grade 5 / Coarse (UNC) / Full Thread / Plain Finish
• M8X1.25X25 M STUD
• 5/8 Hole Buster Car Reamer Type 51-AG
• 1/2-20 DRAIN PLUG W/GASKET SINGLE OVERSIZE
• 1/8 90D ST ELBOW
• 1 3/8-6 X 6 Hex Cap Screw / Grade 8 / Coarse (UNC) / Plain Finish
• #6-32 X 3/16 Stainless Steel Phillips Flat Machine Screw / Grade 18.8
• M8-1.25 x 20 by 8-1.25 x 10 by 30mm Overall Metric Manifold Stud Class 8 Alloy Steel Din 939
• 3/8 Hole Buster Car Reamer Type 51-AG
• 1/2 Hose Barb to Female Hose Swivel Connector Brass
• 3/4-10 X 4 1/2 #3 Flathead Plow Bolt / Grade 5 / Coarse (UNC) / Plain Finish
• 5/16-18 X 1 3/4 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• #6-32 X 2 1/2 Stainless Steel Phillips Flat Machine Screw / Grade 18.8
• M6 X 1.0 X 25 METRIC STUD
• 3/4 Hole Buster Car Reamer Type 51-AG
• 3/4-10 X 4 #3 #3 Dome Head Plow/Scraper Blade Bolt / Grade 8 / Coarse (UNC) / Plain Finish
• #6-32 X 1 Stainless Steel Phillips Flat Machine Screw / Grade 18.8
• 2 BLACK PIPE CLOSE NIPPLE
• 1/2 Hole Buster Car Reamer Type 51-AG
• M6X1.0X20 M STUD
• 5/16-24 X 1/2 Socket Set Screw / Cup Point / Fine (UNF) / Plain Finish
• 3/4-10 X 4 Carriage/Plow/Shaker Screen Bolt / Grade 5 / Coarse (UNC) / Full Thread / Zinc Plated
• 11/2 CL NIPPLE
• 1 1/2X 4 BLACK PIPE LONG NIPPLE
• 3/4-10 X 4 #3 Flathead Plow Bolt / Grade 5 / Coarse (UNC) / Plain Finish
• 1 1/2X 3 BLACK PIPE LONG NIPPLE
• #6-32 X 1/2 Stainless Steel Phillips Flat Machine Screw / Grade 18.8
• 1 1/16 Hole Buster Car Reamer Type 51-AG
• 11" Natural Cable Tie 50 pound tensile strength
• 1 1/2X 2 BLACK PIPE LONG NIPPLE
• #6-32 X 1 1/2 Stainless Steel Phillips Flat Machine Screw / Grade 18.8
• 1" Hole Buster Car Reamer Type 51-AG
• 7" Natural Cable Tie 50 pound tensile strength
• 3/4-10 X 3 1/2 #3 Dome Head Plow/Scraper Blade Bolt / Grade 8 / Coarse (UNC) / Plain Finish
• 1 1/2X 2 1/2 BLACK PIPE LONG NIPPLE
• 5/16-18 X 3/4 Stainless Steel Slotted Flat Machine Screw / Grade 18.8
• 11/32 SINGLE BOND HOSE CLAMP
• R Drill Bit 190AG
• 5/16-18 X 1/2 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• 1 1/4 CLOSE BLACK PIPE NIPPLE
• #Q Drill Bit 190AG
• 3/4-10 X 3-1/2 Carriage/Plow/Shaker Screen Bolt / Grade 5 / Coarse (UNC) / Full Thread / Plain Finish
• 1 1/4X 6 BLACK PIPE LONG NIPPLE
• 5/16 SINGLE BOND NYLON HOSE CLAMP
• 1 3/8-6 X 3 Hex Cap Screw / Grade 8 / Coarse (UNC) / Plain Finish
• 1/4 X 3 Pilot Drill Bit For Hole Saw 1 Flat/SS
• 16-14 GA TERMINAL
• 5/16-18 X 1 1/4 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• 1 1/4X 5 BLACK PIPE LONG NIPPLE
• 1/4 SINGLE BOND HOSE CLAMP
• 3/4-10 X 3 #3 Dome Head Plow/Scraper Blade Bolt / Grade 8 / Coarse (UNC) / Plain Finish
• 5/16-24 X 1 1/2 Socket Set Screw / Cup Point / Fine (UNF) / Plain Finish
• LETTER O Drill Bit 190AG
• 5/16-18 X 1 Stainless Steel Phillips Flat Machine Screw / Grade 18.8
• N Drill Bit 190AG
• 3/4-10 X 3 Carriage/Plow/Shaker Screen Bolt / Grade 5 / Coarse (UNC) / Full Thread / Plain Finish
• 1 1/4 X 2 BLACK PIPE NIPPLE
• M8-1.25 Drill Bit/TAP METRIC BIT
• 3/4-10 X 3 #3 Flathead Plow Bolt / Grade 5 / Coarse (UNC) / Plain Finish
• M6.3-1.0 x 25mm Hex HD Sems Screw 17mm O.D Zinc Class 9.8
• 1 X CL BLACK STEEL NIPPLE
• M6-1.0 Drill Bit & TAP BIT(METRIC)
• 5/16-18 X 1 1/2 Stainless Steel Phillips Flat Machine Screw / Grade 18.8
• OIL DRAIN PLUG CRUSHABLE GASKET
• 1 X 4 BLACK STEEL NIPPLE
• 9/16 OIL GASKET
• #L Drill Bit 190 AG
• 1 X 3 BLACK STEEL NIPPLE
• 1/2 X 3/4 FIBRE OIL PLUG GASKET
• #K Drill Bit B 190AG
• 1X 2 BLACK PIPE NIPPLE
• 3/4-10 X 2 1/4 #3 Dome Head Plow/Scraper Blade Bolt / Grade 8 / Coarse (UNC) / Plain Finish
• 1'X 4 1/2 BLACK PIPE LONG NIPPLE
• 1X 3 1/2 BLACK PIPE LONG NIPPLE
• J Drill Bit Type 190AG
• 6X1/2PHTSP BK OX"
• 3/4-10 X 2 1/2 #3 Dome Head Plow/Scraper Blade Bolt / Grade 8 / Coarse (UNC) / Plain Finish
• 1X 2 1/2 BLACK PIPE NIPPLE
• 1 3/4 DBL.SPLIT ALUMINUM SHAFT COLLAR
• 3/4-10 X 2 1/2 Carriage/Plow/Shaker Screen Bolt / Grade 5 / Coarse (UNC) / Full Thread / Zinc Plated
• 3/4-10 X 2 1/2 Plow/Shaker Screen Bolt / Grade 8 / Coarse (UNC) / Full Thread / Plain Finish
• EMPTY 29 PCS FRACTIONAL Drill Bit INDEX CASE
• 3/4 BLACK PIPE CLOSE NIPPLE
• 3/4-10 X 2 1/2 Carriage/Plow/Shaker Screen Bolt / Grade 5 / Coarse (UNC) / Full Thread / Plain Finish
• 3/4X6 BLACK PIPE NIPPLE
• I Drill Bit 190-AQF
• 3/4X 5 BLACK PIPE LONG NIPPLE
• 3/4-10 X 2 #3 Dome Head Plow/Scraper Blade Bolt / Grade 8 / Coarse (UNC) / Plain Finish
• 3/4X4 BLACK PIPE NIPPLE
• 3/4 X 3 BLACK PIPE LONG NIPPLE
• 3/4 FEMALE SWIVEL CONNECTOR
• 8X1 1/2 HX TS UD
• 3/4-10 X 2 Carriage/Plow/Shaker Screen Bolt / Grade 5 / Coarse (UNC) / Full Thread / Plain Finish
• 3/4X 12 BLACK PIPE NIPPLE
• 3/4 Double Bonded Hose Clamp
• 3/4-10 X 2 #3 Flathead Plow Bolt / Grade 5 / Coarse (UNC) / Plain Finish
• 3/4X 4 1/2 BLACK PIPE NIPPLE
• 1/4 Double Bonded Hose Clamp
• 5/8 Swivel Connector Brass
• 3/4X 3 1/2 BLACK PIPE LONG NIPPLE
• 1/2 Double Bonded Hose Clamp
• 1-8 X 6 #3 Dome Head Plow/Scraper Blade Bolt / Grade 8 / Coarse (UNC) / Plain Finish
• 3/4X 2 1/2 BLACK PIPE LONG NIPPLE
• 1 Double Bonded Hose Clamp
• TRUNK LINER RETAINER (ACURA&HONDA) BLACK NYL
• H Drill Bit 190AG
• 3/4X2 BLACK PIPE LONG NIPPLE (M-113KX2)
• 1/2 Hex Plug Countersunk Brass
• 3/8-16 X 7/16 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• 1-8 X 4 1/2 #3 Dome Head Plow/Scraper Blade Bolt / Grade 8 / Coarse (UNC) / Plain Finish
• 3/4X 1 1/2 BLACK PIPE LONG NIPPLE
• 3/8 Hex Plug Countersunk Brass
• 1/4-20 X 3 Stainless Steel Phillips Flat Machine Screw / Grade 18.8
• 1-8 X 4 #3 Dome Head Plow/Scraper Blade Bolt / Grade 8 / Coarse (UNC) / Plain Finish
• #G Drill Bit 190AG
• 1/2 BLACK PIPE CLOSE NIPPLE
• 1/4 Hex Plug Countersunk Brass
• 1-8 X 3 1/2 #3 Dome Head Plow/Scraper Blade Bolt / Grade 8 / Coarse (UNC) / Plain Finish
• #F Drill Bit 190AG
• 1/8 Hex Plug Countersunk Brass
• 1/4-20 X 3/8 Stainless Steel Phillips Flat Machine Screw / Grade 18.8
• 20mm Head (5/16x15mm) Nissan Push Retainer Black
• 1/2X 5 BLACK PIPE LONG NIPPLE
• 1 5/16 DOUBLE HEAVY SPLIT SHAFT COLLAR SS
• 1-8 X 3 #3 #3 Dome Head Plow/Scraper Blade Bolt / Grade 8 / Coarse (UNC) / Plain Finish
• 3/8-16 X 5/8 Socket Set Screw / Cup Point / Coarse (UNC) / Plain Finish
• 1 5/16 DOUBLE SPLIT STAINLESS STEEL SHAFT COLLAR
• 1/2X 4 BLACK PIPE NIPPLE