Skip to content
FREE SHIPPING on non-Industrial Storage orders $25+
FREE SHIPPING on non-Industrial Storage orders $25+
5/16-18 X 1 1/2 Flange Bolt / Grade 8 / Coarse (UNC) / Yellow Zinc Plated

5/16-18 X 1 1/2 Flange Bolt / Grade 8 / Coarse (UNC) / Yellow Zinc Plated

SKU FB516112C8Z
This 5/16-18 x 1 1/2 hex washer head bolt with a flat bearing surface is made of high-alloy steel and is plated in yellow zinc. Primarily used on truck frames, this bolt's flange eliminates the need of washers and helps compensate for a misaligned hole. Typically used with a Grade G locking flange nut, the bolt system resists bolt slippage by distributing the clamp load over a wide area. The bolts shall be heat-treated, oil-quenched and tempered at a minimum temperature of 800 degrees (F). Being Grade 8 strength, the Proof Load is 120,000 PSI with a minimum Yield Strength of 130,000 PSI and Tensile Strength of 150,000 PSI.
$0.90 - $0.90
$0.90 per piece
$0.90 - $0.90
$0.90 per piece
Description
This 5/16-18 x 1 1/2 hex washer head bolt with a flat bearing surface is made of high-alloy steel and is plated in yellow zinc. Primarily used on truck frames, this bolt's flange eliminates the need of washers and helps compensate for a misaligned hole. Typically used with a Grade G locking flange nut, the bolt system resists bolt slippage by distributing the clamp load over a wide area. The bolts shall be heat-treated, oil-quenched and tempered at a minimum temperature of 800 degrees (F). Being Grade 8 strength, the Proof Load is 120,000 PSI with a minimum Yield Strength of 130,000 PSI and Tensile Strength of 150,000 PSI.
Description
This 5/16-18 x 1 1/2 hex washer head bolt with a flat bearing surface is made of high-alloy steel and is plated in yellow zinc. Primarily used on truck frames, this bolt's flange eliminates the need of washers and helps compensate for a misaligned hole. Typically used with a Grade G locking flange nut, the bolt system resists bolt slippage by distributing the clamp load over a wide area. The bolts shall be heat-treated, oil-quenched and tempered at a minimum temperature of 800 degrees (F). Being Grade 8 strength, the Proof Load is 120,000 PSI with a minimum Yield Strength of 130,000 PSI and Tensile Strength of 150,000 PSI.